Instruction manual
Table Of Contents
- EW500G3_US.pdf
- LeerSeiteGross.pdf
- EW500G3_529662_0109_US_INT.pdf
- Important safety instructions
- The ew 500 G3 evolution wireless series
- Product overview
- Putting the devices into operation
- Using the devices
- Overview of the operating menus
- Cleaning the devices
- If a problem occurs ...
- Specifications
- Manufacturer Declarations
- LeerSeiteGross.pdf
- EW500G3_Rueckseite.pdf
Putting the devices into operation
14
SK 500 bodypack transmitter
Inserting the batteries/accupack
For powering the bodypack transmitter, you can either use two 1.5 V AA size batteries or the
rechargeable Sennheiser BA 2015 accupack.
Push the two catches in the direction of the arrows and open the battery compartment
cover .
Insert the two batteries or the accupack as shown above.
Observe correct polarity when inserting the batteries/accupack.
Close the battery compartment.
The battery compartment cover locks into place with an audible click.
Charging the accupack
To charge the BA 2015 accupack:
Insert the bodypack transmitter into the L 2015 charger (optional accessory).
Connecting the microphone cable/instrument cable
The audio input is designed for the connection of both condenser microphones and instru-
ments (e.g. guitars). DC powering of the condenser microphones is via the audio input.
Use one of the recommended Sennheiser microphones or the optional CI 1 instrument
cable.
Connect the 3.5 mm jack plug from the Sennheiser microphone or instrument cable to
the 3.5 mm jack socket MIC/LINE .
Lock the 3.5 mm jack plug by screwing down the coupling ring of the cable.
Via the operating menu, adjust the sensitivity of the microphone/line input.
The L 2015 charger can only charge the combination BA 2015 accupack/bodypack
transmitter. Standard batteries (primary cells) or individual rechargeable battery
cells cannot be charged.