500 Series Instruction manual
Contents Contents Important safety instructions ............................................................................................................................................................. 2 System ............................................................................................................................................................................................... 2 Receiver .............................................................................................
Important safety instructions Important safety instructions System • Read this instruction manual. • Keep this instruction manual. Always include this instruction manual when passing the devices and the mains unit on to third parties. • Heed all warnings and follow all instructions in this instruction manual. • Only clean the devices when they are not connected to the mains. Use a cloth for cleaning. • Only use attachments/accessories specified by Sennheiser.
Important safety instructions • Danger due to high volumes This device is capable of producing sound pressure exceeding 85 dB(A). 85 dB(A) is the sound pressure corresponding to the maximum permissible volume which is by law (in some countries) allowed to affect your hearing for the duration of a working day. It is used as a basis according to the specifications of industrial medicine. Higher volumes or longer durations can damage your hearing.
The ew 500 G3 evolution wireless series The ew 500 G3 evolution wireless series With the ew 500 G3 evolution wireless series, Sennheiser offers high-quality state-of-the-art RF transmission systems with a high level of operational reliability and ease of use. Transmitters and receivers permit wireless transmission with studio-quality sound. The frequency bank system Please note: Frequency usage is different for each country.
Product overview Product overview Overview of the EM 500 receiver A PEAK 40 30 20 10 RF 0 -10 -20 -30 -40 AF B.Ch: 20.24 ew500 G3 543.200 MHz SKM500 EQ: P + 12dB MUTE B 500 A Operating elements – front panel Headphone output, ¼” (6.
Product overview Overview of the displays of the EM 500 receiver After switch-on, the receiver displays the standard display “Receiver Parameters”. For further illustrations and examples of the different standard displays, please refer to page 25. This standard display displays the operating states of the receiver and provides the most important information on the received transmitter – provided the linked transmitter supports this function. 햴 PEAK 40 30 20 10 RF 0 -10 -20 -30 -40 AF B.CH: 20.
Product overview Display Meaning Transmitter battery status Charge status: approx. 100% approx. 70% approx. 30% Battery icon is flashing; charge status is critical When the battery charge status is critical, “LOW BATT” additionally appears on the display panel.
Product overview Overview of the SK 500 bodypack transmitter 쐋 쐆 쐎 Operating elements Microphone/instrument input (MIC/LINE), 3.
Product overview Overview of the displays of the SK 500 bodypack transmitter After switch-on, the bodypack transmitter displays the standard display “Frequency/Name”. For further illustrations and examples of the different standard displays, refer to page 25. The display backlighting is automatically reduced after approx. 20 seconds. 543.
Product overview Overview of the SKM 500 radio microphone Operating elements Microphone head (interchangeable) Name and pick-up pattern of the microphone head (not visible here) 쐋 Body of radio microphone Battery compartment (not visible from outside) Display panel, backlit in orange Infra-red interface Antenna 10 Color-coded protection ring; available in different colors Operation and battery status indicator, red LED (lit = ON/flashing = LOW BATTERY) Charging contacts Multi
Product overview Overview of the displays of the SKM 500 radio microphone After switch-on, the radio microphone displays the standard display “Frequency/Name”. For further illustrations and examples of the different standard displays, refer to page 25. The display backlighting is automatically reduced after approx. 20 seconds. 543.
Putting the devices into operation Putting the devices into operation EM 500 receiver You can set up the receiver on a flat surface or mount it into a 19” rack. For information on rack mounting, refer to the instruction manual of the EM 500 receiver available on the ew G3 product page at www.sennheiser.com. Setting up the receiver on a flat surface Place the receiver on a flat, horizontal surface. Please note that the device feet can leave stains on delicate surfaces.
Putting the devices into operation Connecting an amplifier/mixing console The receiver’s ¼” (6.3 mm) jack socket and the XLR-3M socket are connected in parallel. Use a suitable cable to connect the amplifier and/or the mixing console to the ¼” (6.3 mm) jack socket and/or the XLR-3M socket . Via the operating menu, adjust the audio output level (“AF Out”) of the receiver to the input of the amplifier or mixing console (see page 27).
Putting the devices into operation SK 500 bodypack transmitter Inserting the batteries/accupack For powering the bodypack transmitter, you can either use two 1.5 V AA size batteries or the rechargeable Sennheiser BA 2015 accupack. Push the two catches cover . in the direction of the arrows and open the battery compartment Insert the two batteries or the accupack as shown above. Observe correct polarity when inserting the batteries/accupack. Close the battery compartment.
Putting the devices into operation Attaching and positioning the MKE 2 microphone Use the microphone clip to attach the microphone to clothing (e.g. tie, lapel). The MKE 2 clip-on microphone has an omni-directional pick-up pattern. It is therefore not necessary to position it precisely. Attaching the bodypack transmitter to clothing You can use the belt clip band). to attach the bodypack transmitter to clothing (e.g.
Putting the devices into operation SKM 500 radio microphone Inserting the batteries/accupack For powering the radio microphone, you can either use two 1.5 V AA size batteries or the rechargeable Sennheiser BA 2015 accupack. 쐋 Unscrew the lower part of the radio microphone from the radio microphone’s body 쐋 by turning it counterclockwise. When unscrewing the radio microphone during operation, the muting function is automatically activated. “MUTE” appears on the display panel.
Using the devices Do not touch the contacts of the radio microphone nor the contacts of the microphone head. The contacts can become dirty or damaged if touched. When unscrewing the microphone head during operation, the muting function is automatically activated. “MUTE” appears on the display panel. When screwing the microphone head back to the radio microphone, the muting function is deactivated. Screw the desired microphone head to the radio microphone. Put the radio microphone back into operation.
Using the devices If you cannot establish a transmission link between transmitter and receiver: Make sure that transmitter and receiver are set to the same frequency bank and to the same channel. If necessary, read the chapter “If a problem occurs ...” on page 30. It is vital to observe the following notes: Make sure that the desired frequencies are listed in the enclosed frequency information sheet.
Using the devices SK 500 bodypack transmitter To switch the bodypack transmitter on (online operation): Push the two catches ON/OFF and open the battery compartment cover . Briefly press the ON/OFF button . The bodypack transmitter transmits an RF signal. The transmission icon is displayed. The red ON LED lights up and the standard display “Frequency/Name” appears on the display panel. You can switch the bodypack transmitter on and deactivate the RF signal on switchon.
Using the devices Use this function to save battery power or to prepare a bodypack transmitter for use during live operation without causing interference to existing transmission links. To activate the RF signal: SET SET Briefly press the ON/OFF button . “RF Mute Off” appears on the display panel. Press the SET button . The transmission icon is displayed again. SKM 500 radio microphone To switch the radio microphone on (online operation): ON/OFF Briefly press the ON/OFF button .
Using the devices Press the multi-function switch . The transmission frequency is displayed but the radio microphone does not transmit an RF signal. The transmission icon is not displayed. When the pilot tone function is activated on both radio microphone and receiver, “RF Mute” appears on the receiver’s display panel. 543.
Using the devices Deactivating the lock mode temporarily You can activate or deactivate the automatic lock mode via the “Auto Lock” menu item (see page 26). If the lock mode is activated, you have to temporarily deactivate it In order to be able to operate the devices: EM 500 Turn the jog dial. “Unlock?” appears on the display panel. Press the jog dial. The lock mode is temporarily deactivated (see below). SK 500 Press the rocker button. “Unlock?” appears on the display panel.
Using the devices Muting the audio signal or deactivating the RF signal EM 500 To mute the audio signal: When one of the standard displays is shown on the display panel, press the STANDBY button. “RX Mute On?” appears on the display panel. Press the jog dial. The audio signal is muted. “RX Mute” appears in alternation with the current standard display. To unmute the audio signal: Press the STANDBY button. “RX Mute Off?” appears on the display panel. Press the jog dial. The muting is canceled.
Using the devices Audio signal is muted Transmitter’s display panel: “MUTE” is displayed Receiver’s display panel: “TX Mute” is displayed* * only when activated on the receiver (see above) Audio signal is activated (muting is deactivated) Transmitter’s display panel: “MUTE” is not displayed Receiver’s display panel: “TX Mute” is not displayed RF signal is deactivated Transmitter’s display panel: Transmission icon is not displayed Receiver’s display panel: “RF Mute” is displayed* * only
Using the devices Selecting a standard display EM 500 Press the jog dial to select a standard display: Contents of the display PEAK 40 0 -10 -20 -30 -40 AF 30 20 10 RF PEAK 40 0 -10 -20 -30 -40 AF 30 20 10 RF B.CH: 20.24 543.200 MHz SKM500 EQ: P + 12dB MUTE 543.200 MHz ew500 G3 SKM500 PEAK 0 -10 -20 -30 -40 AF 30 20 10 RF 40 30 20 10 RF 0 -10 -20 -30 -40 AF 935 Standard “Receiver Parameters” appears after switch-on of the receiver and displays the receiver parameters (see page 5).
Overview of the operating menus Overview of the operating menus For more detailed information on the operating menus, refer to the individual instruction manuals of the devices. These instruction manuals can be downloaded from the respective product pages at www.sennheiser.com.
Overview of the operating menus Display Function of the menu item Easy Setup Scans for unused frequency presets, releases and selects frequency presets Frequency Preset Changes the frequency bank and the channel Name Enters a freely selectable name AF Out Adjusts the audio output level Adjustment range: –24 dB to +24 dB, adjustable in 3-dB steps, 6 dB gain reserve Special function “gain reserve”: When you have adjusted a level of +18 dB, turn the jog dial to the right and keep it in this posit
Overview of the operating menus Display Function of the menu item TX-Mute • Transmitter is muted or • no pilot tone RX-Mute Receiver is muted Low Battery Exit Charge status of the transmitter battery/the BA 2015 accupack is critical Exits the submenu “Warnings” and returns to the extended menu “Advanced Menu” SK 500 and SKM 500 Main menu “Menu” Sensitivity Frequency Preset Name Auto Lock Advanced Exit Display Extended menu “Advanced” Tune Mute Mode (SK) RF Power Cable Emulation (SK) Pilot Tone LC
Cleaning the devices Cleaning the devices CAUTION! Liquids can damage the electronics of the devices! Liquids entering the housing of the devices can cause a short-circuit and damage the electronics. Keep all liquids away from the devices. EM 500 Before cleaning, disconnect the device from the mains. Use a slightly damp cloth to clean the receiver from time to time. Do not use any solvents or cleansing agents. SK 500 Use a slightly damp cloth to clean the bodypack transmitter from time to time.
Cleaning the devices If a problem occurs ... EM 500 Problem Receiver cannot be operated, “Locked” appears on the display panel No operation indication No RF signal Possible cause Lock mode is activated Check the connections of the mains unit. Set the transmitter and receiver to the same channel. To do so, use the synchronization function (see page 21). Transmitter is out of range Check the squelch threshold setting (see page 26). Reduce the distance between transmitter and receiving antennas.
Cleaning the devices SK 500 and SKM 500 Problem Possible cause Possible solution Devices cannot be operated, “Locked” appears on the display panel Lock mode is activated Deactivate the lock mode (see page 22). No operation indication Batteries are flat or accupack is flat Replace the batteries or recharge the accupack (see page 16).
Specifications Specifications EM 500 RF characteristics Modulation Receiving frequency ranges Switching bandwidth Nominal/peak deviation Receiver principle Sensitivity (with HDX, peak deviation) wideband FM 516–558, 566–608, 626–668, 734–776, 780–822, 823–865 MHz (A to E, G, see page 4) 1,680 frequencies, tuneable in steps of 25 kHz 20 frequency banks, each with up to 32 factory-preset channels, intermodulation-free 6 frequency banks, each with up to 32 user programmable channels 42 MHz ±24 kHz/±48 kHz t
Specifications In compliance with (EM) Europe: EMC Radio Safety USA: 47 CFR 15 subpart B EN 301489-1/-9 EN 300422-1/-2 EN 60065 Approved by Canada: Industry Canada RSS 210, IC: 2099A-G3SKMEM Mains unit Input voltage Power/current consumption Output voltage Secondary output current Temperature range 100 to 240 V~, 50/60 Hz max.
Specifications AF characteristics Compander system AF frequency response SK SKM S/N ratio (1 mV, peak deviation) THD Max. input voltage (SK) microphone/line Input impedance (SK) microphone/line Input capacitance (SK) Adjustment range of input sensitivity Sennheiser HDX microphone: 80–18,000 Hz line: 25–18,000 Hz 80–18,000 Hz ≥ 110 dBA ≤0.
Specifications Microphones (SK 500) MKE 2 Microphone type condenser Sensitivity 5 mV/Pa Pick-up pattern omni-directional Max. SPL 142 dB SPL Microphone heads (SKM 500) Radio microphone type MMD 935-1 dynamic MMD 945-1 dynamic Sensitivity Pick-up pattern 2.5 mV/Pa cardioid 1.8 mV/Pa super-cardioid Max. SPL 154 dB SPL 154 dB SPL MMK 965-1 Externally polarized dual diaphragm condenser microphone 7 mV/Pa / 2.
Manufacturer Declarations Polar diagram MMK 965-1 (super-cardioid) Frequency response curve MMK 965-1 dBV -30 -40 -50 -60 -70 -80 50 0 00 11 0 200 Low Cut 500 11.0k0 0 Hz 2k 5k 1100.0k0 0 20k PAD Manufacturer Declarations Warranty Sennheiser electronic GmbH & Co. KG gives a warranty of 24 months on this product. For the current warranty conditions, please visit our web site at www.sennheiser.com or contact your Sennheiser partner.
Manufacturer Declarations Statements regarding FCC and Industry Canada These devices comply with Part 15 of the FCC Rules and with RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1) these devices may not cause harmful interference, and (2) these devices must accept any interference received, including interference that may cause undesired operation.
Sennheiser electronic GmbH & Co. KG Am Labor 1, 30900 Wedemark, Germany www.sennheiser.com Printed in Germany Publ.
