Instruction manual ew 100 G4

ManualsBrandsSennheiser ManualsPro AudioEW 100 G4-865-S Wireless Handheld Microphone System with MME 865 Capsule

Table Of Contents

Overview
ew 100 G4 series products
- EM 100 G4 rack receiver
- SKM 100 G4 handheld transmitter
- SK 100 G4 bodypack transmitter
Accessories
- Microphones and cables
- Rechargeable battery and charger
- Accessories for rack mounting
  - GA 3 rack mount kit
  - AM 2 antenna front mounting kit
- Antennas and accessories
- Additional accessories
  - Color labeling set
  - Microphone clamp
The frequency bank system
Installing and starting up ew 100 G4 series devices
Installing the EM 100 G4
- Connectors on the rear of the device
  - Product overview for the rear side of the EM 100 G4
- Connecting/disconnecting the EM 100 G4 to/from the power supply system
- Creating a data network
  - Setting up a multi-channel system with more than 12 receivers
- Outputting audio signals
- Connecting antennas
- Installing the EM 100 G4 in a rack
  - Mounting a single receiver in a rack
  - Mounting two receivers side by side in a rack
Installing the SKM 100 G4
- Inserting and removing the batteries/rechargeable batteries
  - Battery status
- Replacing the microphone module
- Changing the colored ring
Installing the SK 100 G4
- Inserting and removing the batteries/rechargeable batteries
  - Battery status
- Connecting a microphone to the SK 100 G4
- Connecting an instrument or line source to the SK 100 G4
- Attaching the bodypack transmitter to clothing
Installing the ASA 214
- Connectors on the rear of the device
  - Product overview for the rear side of the ASA 214
- Connecting/disconnecting the ASA 214 to/from the power supply system
- Connecting receivers to the ASA 214
- Connecting antennas
  - Connecting remote antennas
  - Connecting rod antennas
- Information on antenna amplifiers and cable lengths
- Configuring multi-channel systems
- Installing the ASA 214 in a rack
  - Mounting a single antenna splitter in a rack
  - Mounting two antenna splitters side by side in a rack
Using ew 100 G4 series devices
Using the EM 100 G4
- Operating elements on the front of the device
  - Product overview for the front of the EM 100 G4
- Switching the EM 100 G4 on and off
- Muting the audio output
- Lock-off function
- Displays on the EM 100 G4 display panel
- Buttons for navigating through the menu
- Home screen
  - Receiver Parameters standard display
  - Soundcheck standard display
  - RF Min
  - RF Max
  - AF Max
  - Guitar Tuner standard display
- Setting options in the menu
- Menu structure
- Squelch menu item
- Easy Setup menu item
  - Scan New List
  - Current List
  - Reset
  - Performing multi-channel frequency setup
  - Setting up a multi-channel system with more than 12 receivers
- Frequency Preset menu item
- Name menu item
- AF Out menu item
- Equalizer menu item
- Auto Lock menu item
- Advanced menu item
- Advanced -> Tune menu item
  - Only adjusting the frequency
  - Setting the channel and frequency
- Advanced -> Guitar Tuner menu item
- Advanced -> Pilot Tone menu item
- Advanced -> LCD Contrast menu item
- Advanced -> Reset menu item
- Advanced -> Software Revision menu item
Using the SKM 100 G4
- Operating elements of the SKM 100 G4 handheld transmitter
- Switching the SKM 100 G4 handheld transmitter on and off
- Muting the handheld transmitter (AF mute)
  - SKM 100 G4
  - SKM 100 G4-S
- Deactivating the RF signal (RF mute)
- Lock-off function
- Displays on the SKM 100 G4 handheld transmitter display panel
  - Select a standard display
- Buttons for navigating the SKM 100 G4 menu
  - Navigating through the menu
  - Making changes in a menu item
- Setting options in the menu
- Sensitivity menu item
- Frequency Preset menu item
- Name menu item
- Auto Lock menu item
- Advanced menu item
- Advanced > Tune menu item
  - Only adjusting the frequency
  - Setting the channel and frequency
- Advanced > Mute Mode menu item (SKM 100 G4-S only)
- Advanced > Pilot Tone menu item
- Advanced > LCD Contrast menu item
- Advanced > Reset menu item
- Advanced > Software Revision menu item
Using the SK 100 G4
- Operating elements of the SK 100 G4 bodypack transmitter
- Switching the SK 100 G4 bodypack transmitter on and off
- Muting the bodypack transmitter (AF mute)
- Deactivating the RF signal (RF mute)
  - Deactivating the RF signal with the MUTE switch
  - Deactivating the RF signal with the ON/OFF button
- Lock-off function
- Displays on the SK 100 G4 bodypack transmitter display panel
  - Select a standard display
- Buttons for navigating the SK 100 G4 menu
  - Navigating through the menu
  - Making changes in a menu item
- Setting options in the menu
- Sensitivity menu item
- Frequency Preset menu item
- Name menu item
- Auto Lock menu item
- Advanced menu item
- Advanced > Tune menu item
  - Only adjusting the frequency
  - Setting the channel and frequency
- Advanced > Mute Mode menu item
- Advanced > Cable Emulation menu item
- Advanced > Pilot Tone menu item
- Advanced > LCD Contrast menu item
- Advanced > Reset menu item
- Advanced > Software Revision menu item
Establishing a radio link
- Setting notes
Synchronizing devices
Using the ASA 214
- Operating elements on the front of the device
- Switching the ASA 214 on and off
Overview
Product variants
- EM 100 G4 product variants
  - Made in Germany
  - Assembled in the USA
- SKM 100 G4 product variants
  - Made in Germany
  - Assembled in the USA
- SK 100 G4 product variants
  - Made in Germany
  - Assembled in the USA
Frequency tables
Specifications
- EM 100 G4
- SKM 100 G4
- SK 100 G4
- ASA 214
  - Specifications
  - Block diagram
Pin assignment
- 3.5 mm stereo jack plug
- 3.5 mm mic jack plug
- 3.5 mm line jack plug
- 6.3 mm stereo jack plug, balanced (audio in/loop out)
- 6.3 mm mono jack plug, unbalanced
- 6.3 mm stereo jack plug for headphone jack
- XLR-3 plug, balanced
- Hollow jack plug for power supply
Cleaning and maintenance
- Cleaning the sound inlet basket of the microphone module

Using the EM 100 G4

74

►