Microphone Brochure

Synchronizing transmitters with receivers
44
If you want to use the frequency bank “U”:
왘 Make sure to use receivers from the same frequency range (see page 5
and the type plates of the devices).
왘 Only use frequencies that are approved and legal in your country.
왘 On one of the receivers, select a channel within the frequency bank “U”
(see page 39).
왘 Assign this channel one of the receiving frequencies (see page 39).
왘 Synchronize a transmitter with the receiver (see page 20).
OR
왘 Manually set the transmitter to the same channel and frequency that
you set on the receiver.
왘 Repeat for the remaining transmitters and receivers as described
above.