Product specification

ManualsBrandsSennheiser ManualsHandset Cordless PhoneEM 2000

FEATURES

20 ﬁxed frequency banks with up to



64 compatible presets in up to 75 MHz

switching bandwidth and 6 user banks

Integrated antenna splitter for



cascading up to 8 devices without using

additional splitters

Rugged 19“ all-metal housing with



integrated power supply unit

Ethernet for monitoring and control



using Sennheiser WSM Mac or PC

software

Transmitters can be conﬁgured in the



receiver menu and can be synchronized

via the infrared interface

Enhanced AF frequency response



(25....18000 Hz)

ARCHITECT’S

SPECIFICATIONS

The device shall be a single channel, true

diversity (two tuners per receiver channel)

stationary receiver for use with a companion

transmitter as part of a high reliability true

diversity wireless radio frequency transmission

system. The stationary receiver shall operate

within a RF frequency range of 516 – 865 MHz

in 20 ﬁxed frequency banks and 6 user banks,

each with a maximum of 64 presets with a

switching bandwidth of maximum 75 MHz

tunable in 25 kHz steps; carrier frequencies

shall be maximum 3000. Squelch threshold

shall be defeatable (off) or adjustable from 5 –

25 dBµV in 2dB steps. Nominal/peak deviation

shall be ±24 kHz/±48 kHz. Intermodulation

spacing shall be ≥75dB. A compander feature

shall be included and shall be Sennheiser HDX

system with pilot-tone squelch (switchable).

Sensitivity shall be < 2.0 µV for 52 dBArms S/N

with HDX engaged at peak deviation. Adjacent

channel rejection shall be ≥80dB (typical);

blocking shall be ≥80dB. Audio frequency res-

ponse shall be 25 – 18,000 Hz; total harmonic

distortion (THD) shall be <0.9%.

Continued on page 2

Hiding underneath the sturdy 19-inch metal housing of the stationary receiver

is highly advanced professional transmission technology. As with all compo-

nents of the 2000 series, with the EM 2000 you can use ﬁve windows of up

to 75 MHz in the UHF range. 20 channel bands with up to 64 presets and 6

channel bands each with up to 64 user-programmable channels are available.

Each transmitter can be synchronized quickly and easily using infrared. The

transmitter can be connected to networks via its Ethernet socket and can be

monitored and controlled remotely from the Mac or PC using the Sennheiser

Wireless System Manager software.

TECHNICAL DATA

RF frequency range .............................................516 – 865 MHz

Carrier frequencies ..............................................max. 3000

Presets ...................................................................max. 64

Switching bandwidth .......................................... max. 75 MHz, tuneable in

25 kHz steps

Nominal / Peak deviation...................................±24 kHz / ±48 kHz

Squelch threshold ................................................ Off, 5 – 25 dBµV : Can be set in

2 dB steps

Intermodulation spacing ....................................≥ 75 dB

Sensitivity

(with HDX, peak deviation) ...............................≤ 2 µV for 52 dBArms S/N

Adjacent channel rejection ................................typ. ≥ 80 dB

Blocking ................................................................≥ 80 dB

Antenna connector ..............................................2 BNC (50 OHM)

Cascadable ............................................................2 BNC (50 OHM)

Gain ........................................................................ 0 dB ±0,5 dB : Based on

antenna inputs

Compander ............................................................HDX

Frequency response ............................................25 – 18000 Hz

Signal-to-noise ratio ...........................................> 120 dB(A)

THD, total harmonic distortion .........................< 0,9 %

Audio-XLR connector ..........................................XLR-3 + 2 x 6,3 mm : Jack

Audio output level (balanced) .......................... +18 dBu max : Setting range: 49 dB

in 1 dB steps + 6 dB gain reserve

Continued on page 2

EM 2000 True Diversity Receiver

Summary of content (3 pages)

PAGE 1
EM 2000 FEATURES 20 fixed frequency banks with up to 64 compatible presets in up to 75 MHz switching bandwidth and 6 user banks Integrated antenna splitter for cascading up to 8 devices without using additional splitters Rugged 19“ all-metal housing with integrated power supply unit Ethernet for monitoring and control using Sennheiser WSM Mac or PC software Transmitters can be configured in the receiver menu and can be synchronized via the infrared interface Enhanced AF frequency re
PAGE 2
EM 2000 True Diversity Receiver ARCHITECT’S SPECIFICATIONS Audio frequency output level shall be adjustable within a 49 dB range in 1 dB steps to a maximum of level of +18 dBu (balanced). Signalto-noise ratio shall be > 120 dB(A). The audio output shall utilize a transformer-balanced male XLR-3 audio socket along with a transformer-balanced ¼“ (6.3 mm) audio socket; a stereo headphone output with local level control shall be provided on the front panel and shall utilize a ¼“ (6.3 mm) stereo audio socket.
PAGE 3
EM 2000 True Diversity Receiver PRODUCT VARIANTS RECOMMENDED ACCESSORIES EM 2050 AW 516 ... 558 MHz Cat. No. 503144 EM 2050 AW-X 516 ... 558 MHz / Europe Cat. No. 503739 EM 2050 GW 558 ... 626 MHz Cat. No. 503742 EM 2050 GW-X 558 ... 626 MHz / Europe Cat. No. 503743 EM 2050 BW 626 ... 698 MHz Cat. No. 503746 EM 2050 BW-X 626 ... 698 MHz / Europe Cat. No. 503747 EM 2050 CW 718 ... 790 MHz Cat. No. 503750 EM 2050 CW-X 718 ... 790 MHz / Europe Cat. No. 503751 EM 2050 DW 790 ... 865 MHz Cat. No.