Users Manual

Using the EM 100 G4

Home screen

After you switch on the receiver, the display panel initially displays the

Sennheiser logo. After a short time, the home screen is then displayed.

The home screen has three different standard displays.

▷ On the home screen, press the UP and DOWN buttons to switch be-

tween the standard displays.

Receiver Parameters standard display

►

1 RF RF level (radio frequency)

• RF signal level display

• including the display of the squelch threshold (see “Squelch menu

item”)

2 AF audio level (audio frequency)

• Displays the audio level of the received transmitter

When the display shows full deflection, the audio input level is exces-

sively high. When the transmitter is overloaded frequently or for ex-

tended periods of time, the PEAK display is shown inverted.

• See “AF Out menu item”

3 Frequency bank and channel

• Current frequency bank and channel number

• See “Frequency Preset menu item”

4 Frequency

• Current receiving frequency

• See “Frequency Preset menu item”

5 Name

• Freely selectable name of the receiver

• See “Name menu item”

6 P pilot tone