User Manual and Operating Guide

4
Using the EK 2020 D
You can connect an induction loop or any pair of headphones with
a 3.5 mm mono or stereo jack plug to the headphone socket 쐋 of
the EK 2020 D. The headphone impedance must be 32 Ω or higher.
왘 Connect the induction loop or the 3.5 mm jack plug of your
headphones to the headphone socket 쐋 of the EK 2020 D.
To switch the receiver on:
왘 Briefly press the ON/OFF button 쐂 .
The display 쐏 switches on.
To switch the receiver off:
왘 Press the ON/OFF button 쐂 for 3 seconds.
When you unplug the headphones from the receiver or switch
off the transmitter, the receiver automatically switches off
after 5 minutes.
쐂
쐏
쐋