Tourguide System 2020 EK 2020 D Quick guide 쐄 쐋 쐂 햲 햳 6 쐏 햵 쐇 쐃 햴
Important safety instructions • • • • Please read this instruction manual carefully and completely before using the product. Make this instruction manual easily accessible to all users at all times. Always include this instruction manual when passing the product on to third parties. Do not use the product in situations which require special attention (e.g. when performing skilled jobs). Always keep the product dry and do not expose it to extreme temperatures.
Safety instructions for Lithium-Polymer rechargeable batteries If abused or misused, rechargeable batteries may leak or be damaged. In extreme cases, they may even present CAUTION! • • • • a heat hazard, a fire hazard, an explosion hazard, a smoke or gas hazard Keep away from children. Dispose of rechargeable batteries at special collection points or return them to your specialist dealer. Observe correct polarity. Do not short-circuit. Do not expose to moisture.
EK 2020 D The EK 2020 D receiver has been designed for use with the Tourguide System 2020. For details on the use of the receiver, please refer to the instruction manual of the overall system (ID No. 516509, 08/06). You can obtain the instruction manual separately from your Sennheiser dealer or download it from www.sennheiser.com.
Using the EK 2020 D You can connect an induction loop or any pair of headphones with a 3.5 mm mono or stereo jack plug to the headphone socket 쐋 of the EK 2020 D. The headphone impedance must be 32 Ω or higher. 쐂 쐏 쐋 왘 Connect the induction loop or the 3.5 mm jack plug of your headphones to the headphone socket 쐋 of the EK 2020 D. To switch the receiver on: 왘 Briefly press the ON/OFF button 쐂 The display 쐏 switches on. . To switch the receiver off: 왘 Press the ON/OFF button 쐂 for 3 seconds.
Attaching the EK 2020 D to clothing or a belt 왘 Use the clip to attach the receiver to your clothing or your belt. Accessories and spare parts Only use original Sennheiser accessories and spare parts, otherwise the product quality can be impaired or the product can be damaged. Cat. No.
Specifications Modulation RF frequency range RF frequency range (US) Channels • for the Tourguide system • for conferences AF frequency response Headphone output Power supply Operating time Charging time Dimensions Weight 2 FSK 863–865 MHz 926–928 MHz 6 8 100–7,000 Hz 3.5 mm jack socket Lithium-Polymer rechargeable battery, 1,500 mAh approx 16 hrs approx.
Manufacturer Declarations Warranty Sennheiser electronic GmbH & Co. KG gives a warranty of 24 months on this product. For the current warranty conditions, please visit our website at www.sennheiser.com or contact your Sennheiser partner. In compliance with the following requirements • RoHS Directive (2002/95/EC) • WEEE Directive (2002/96/EC) Please dispose of this product at the end of its operational lifetime by taking it to your local collection point or recycling center for such equipment.
Statements regarding FCC and Industry Canada This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Sennheiser electronic GmbH & Co. KG Am Labor 1, 30900 Wedemark, Germany www.sennheiser.com Printed in Germany Publ.
