Product specification

ManualsBrandsSennheiser ManualsOtherE 912

FEATURES

Frequency response and sensitivity



optimized for picking up instruments,

vocals and speech

Unobtrusive, ﬂat housing



Extremely rugged and step-resistant



Shock-absorbing rubber base



Mounting slots for table installation



Gold-plated XLR connector



Integrated preamp



ARCHITECT’S

SPECIFICATIONS

The microphone shall be a half-cardioid pre-

polarized condenser designed for picking

up instruments, vocals and speech. It shall

have an unobtrusive, ﬂat housing with an

extremely rugged, step-resistant sound inlet

basket and a shock-absorbing rubber base.

The microphone shall have an integrated

preamp. The frequency response shall be

20 Hz-20,000 Hz and the sensitivity (free

ﬁeld, no load) shall be 10 mV/Pa at 1 kHz.

Nominal impedance shall be less than

100 O, with a min. terminating impedance

of 1 kO. Equivalent noise level shall be

26 dB(A). Maximum SPL shall be 135.6 dB.

The microphone shall operate on 48 V phan-

tom power and shall provide a gold-plated

3-pin XLR connector. Dimensions shall be

126.5 x 105 x 26.5 mm (4.98“ x 4.13“ x

1.04“). Weight shall be 550 grams (19.40

oz). The microphone shall be the Sennheiser

e 912.

The e 912 is an ideal choice for pianos, theatre and opera productions,

conference applications, altars and lecterns. To optimally match the installation

environment, the e 912 is available in black or creme white.

TECHNICAL DATA

Transducer principle (Microphone) .....................Permanently polarized condenser

Pick-up pattern ........................................................half-cardioid

Frequency response (microphone) .....................20.....20,000 Hz

Sensitivity (free ﬁeld, no load at 1 kHz) ...........10 mV/Pa

Nominal impedance ................................................< 100 Ohm

Min. terminating impedance ................................1000 Ohm

Equivalent noise level ............................................26 dB(A)

Max. sound pressure level (active) .....................135.6 dB

Phantom powering .................................................48 V / 1.1 mA

Dimensions ...............................................................126.5 x 105 x 26.5 mm

Weight .......................................................................550 g

DELIVERY INCLUDES

1 e 912

1 pouch

Instructions for use

e 912

Pre-polarized condenser boundary

microphone with half-cardioid pick-up pattern

Summary of content (2 pages)

PAGE 1
e 912 Pre-polarized condenser boundary microphone with half-cardioid pick-up pattern FEATURES Frequency response and sensitivity optimized for picking up instruments, vocals and speech Unobtrusive, flat housing Extremely rugged and step-resistant Shock-absorbing rubber base Mounting slots for table installation Gold-plated XLR connector Integrated preamp ARCHITECT’S SPECIFICATIONS The microphone shall be a half-cardioid prepolarized condenser designed for picking up instrumen
PAGE 2
e 912 Pre-polarized condenser boundary microphone with half-cardioid pick-up pattern FREQUENCY RESPONSE PRODUCT VARIANTS e 912 WH – boundary microphone in white Cat. No. 500648 e 912 BK – boundary microphone in black Cat. No. 500647 e 912 S BK – boundary microphone in black with switch, acoustically optimized for picking up speech Cat. No. 500875 e 912 S NX – boundary microphone in Nextel grey with switch, acoustically optimized for picking up speech Cat. No.