Instruction manual

e 906 | 6/8
Cleaning and maintaining the e 906
Cleaning and maintaining the e 906
CAUTION
LIQUIDS CAN DAMAGE THE ELECTRONICS OF THE PRODUCT!
Liquids entering the housing of the product can cause a short-circuit and damage the electronics.
f Keep all liquids away from the product.
f Do not use any solvents or cleansing agents.
f Disconnect the products from the power supply system and remove rechargeable batteries and
batteries before you begin cleaning.
f Clean all products only with a soft, dry cloth.
Specifications
Transducer principle dynamic
Frequency response 40 - 18,000 Hz
Pick-up pattern super-cardioid
Sensitivity (free field, no load) 2,2 mV/Pa
Nominal impedance (at 1 kHz) 350 Ω
Min. terminating impedance 1 kΩ
Connector XLR-3
Dimensions 55 x 34 x 134 mm
Weight 140 g