User's Manual

Cleaning and maintaining the headset system

Cleaning and maintaining the

headset system

Damage to the product due to liquids!

Liquids entering the product can short-circuit the electronics

or damage the me

chanics.

Solvents or cleansing agents can dama

ge the surface of the

product.

왘 Keep all liquids far away from the product.

왘 Do not use any solvents or cleansing agents

왘 Before cleaning, switch the product off and disconnect the base station

from the mains.

왘 Only use a dry and soft cloth to clean the product.

왘 Clean the charging contacts  of the base station and the charging

contacts  of the headset from time to time using e.g. a cotton swab.



Replacing the ear pad(s)

You can replace the ear pad(s). Spare ear pads are available from your

Sennheiser partner.

왘 Carefully remove the old ear pad .

왘 Attach the new ear pad to the ear cup by pressing

firmly around the ear

pad until you hear it lock into place.

CAUTION