Instruction manual

8
When using the selective input modules:
y Make sure that all transmitters and receivers of your
transmission system operate within the frequency win-
dow of the selective input modules!
When using the wideband input modules:
y Use an active antenna (e.g. A 12 AD antenna) or an
antenna with antenna booster (e.g. GZA 1036 antenna
with AB 1036 antenna booster).
To exchange the input modules:
왘 Use a crosstip screwdriver to loosen the screw of the
catch for the input modules 쐆.
왘 To remove the input modules 쐂 and 쐊, plug a BNC con-
nector into the input modules‘ BNC sockets and pull hard
(!) at the BNC connector.
왘 Insert the new input modules and tighten the screw of
the catch 쐆.
쐆
쐂쐊
쐆