Instruction manual

6
Putting the unit into operation
Setting up the unit
The unit is suitable for use as table top or can be mounted
into a rack.
왘 Fix the unit to a 19" rack by using the supplied rack-
mounting kit.
왘 To set up the unit on an even, horizontal surface, fix the
four self-adhesive plastic feet to the base of the unit.
Note:
Some furniture surfaces have been treated with varnish,
polish or synthetics which might cause stains when they
come into contact with other synthetics. Despite a tho-
rough testing of the synthetics used by us, we cannot
rule out the possibility of discoloration, since we don’t
know your furniture. To protect your furniture, we
recommend placing the unit on a non-slip pad.
Connecting the antennas
왘 You can connect the following antenna types to the BNC
sockets  and 쐊 of the input modules:
y two GZA 1036 or A 2003-UHF passive antennas or
y two A 12 active antennas or
y two GZA 1036 passive antennas with AB 1036 antenna
boosters.
The ASA 3000 routes the antenna signals without loss
to the respective antenna outputs.
Notes:
The ASA 3000 is delivered with the DC supply voltage
for active antennas or antenna boosters turned on. The
two LEDs DC FEED ANT A 쐃 and DC FEED ANT B 쐇 light
up green.
쐂쐊
쐇쐃