Manual
Table Of Contents
- Important safety instructions
- Package contents
- Product overview
- Getting started
- Installing the AMBEO Soundbar
- Connecting devices to the AMBEO Soundbar
- Putting the AMBEO Soundbar into operation
- Using the AMBEO Soundbar
- Using the AMBEO Soundbar
- Connecting the AMBEO Soundbar to a Bluetooth/NFC device
- Installing the Smart Control app
- Network connection via WiFi or Ethernet
- Controlling music playback
- Using the sound profiles
- Adjusting the AMBEO modes
- Using the night mode “NIGHT”
- Adjusting the equalizer
- Using the Dolby DRC
- Using the Dolby Dialog Normalizer
- Using the Dolby Virtualizer
- Adjusting the brightness of the display and the AMBEO display
- Sound feedback
- Transporting the AMBEO Soundbar
- Maintaining the AMBEO Soundbar
- Specifications
- Manufacturer Declarations
- Appendix
Putting the AMBEO Soundbar into operation
30 | AMBEO Soundbar
Putting the AMBEO Soundbar into
operation
Preparing the SB01-RC remote control
To remove the transport protection of the battery:
▷ Use a suitable object (e.g. a coin) to open the battery compart-
ment cover (located on the bottom side of the remote control) by
turning one turn counter-clockwise.
▷ Remove the plastic strip.
▷ Close the battery compartment cover by turning one turn clock-
wise.
Connecting/disconnecting the Soundbar
to/from the power supply system
Connecting the Soundbar to the power supply system
▷ Connect the plug of the power cable to the POWER socket on the
Soundbar.
▷ Connect the power plug of the power cable to a suitable wall
socket.
CAUTION
Danger of damage to the product!
If you connect to an unsuitable power supply, the product can be
damaged.
▷ Use a suitable power cable to connect the product to the power
supply system (100 - 240 V~, 50/60 Hz).