Manual
Table Of Contents
- Important safety instructions
- Package contents
- Product overview
- Getting started
- Installing the AMBEO Soundbar
- Connecting devices to the AMBEO Soundbar
- Putting the AMBEO Soundbar into operation
- Using the AMBEO Soundbar
- Using the AMBEO Soundbar
- Connecting the AMBEO Soundbar to a Bluetooth/NFC device
- Installing the Smart Control app
- Network connection via WiFi or Ethernet
- Controlling music playback
- Using the sound profiles
- Adjusting the AMBEO modes
- Using the night mode “NIGHT”
- Adjusting the equalizer
- Using the Dolby DRC
- Using the Dolby Dialog Normalizer
- Using the Dolby Virtualizer
- Adjusting the brightness of the display and the AMBEO display
- Sound feedback
- Transporting the AMBEO Soundbar
- Maintaining the AMBEO Soundbar
- Specifications
- Manufacturer Declarations
- Appendix
Connecting devices to the AMBEO Soundbar
AMBEO Soundbar | 29
Using the cable tie
To achieve strain relief on the sockets of the Soundbar:
▷ Bundle the cables.
▷ Place the cables in the cable tie and tighten it.
▷ Close the cable tie.
Using the USB socket for updates
If the Soundbar is not connected to the Internet, you can install a
firmware update on the Soundbar using a USB flash drive. For more
information on the update,
> 51.
A power supply of 5 V ⎓, 1 A for accessories (external devices) is pos-
sible.
▷ Insert a USB flash drive or external accessory powered by USB
(type B, to be ordered separately) into the
USB socket on the
Soundbar.
AUX IN
SW PRE
OUT
OPT IN
HDMI 3 IN
HDMI 2 IN
HDMI 1 IN
HDMI TV
(eARC) OUT
ETHERNET
USB
POWER