ADN System Instruction Manual

Using the “Conference Manager” software
222 | ADN Digital Conference System
“Error“
Column “Description“ “Location“ Meaning
Cabling error on
power supply unit at
pos.###
(Port##.##)
[CU Main
######]
Faulty system cable connected to power
supply
Conference Unit S/N:
###### failure at
Pos.###: Please
contact service
[CU Main
######]
Defective conference unit has been
detected. Contact your Sennheiser partner
(see page 236)
Corrupted USB device [CU Main
######]
Error of the USB mass storage device
CU recording perfor-
mance problem
[CU Main
######]
Performance problem of the CU1. In case of
repeated occurrence, contact your
Sennheiser partner (see page 236).
Insufficient USB
device performance
[CU Main
######]
Read/write speed of the USB mass storage
device is not sufficient
Invalid USB device
format
[CU Main
######]
USB mass storage device uses a file system
that is not supported
No USB device
available
[CU Main
######]
No USB mass storage device available
Selftest result: Error [CU Main
######]
Self-test has failed
Set Conference
mode=##
denied => Value out
of range
{Automatic=##,
Overrun=##,
Request=##,
Push_To_Talk=##}
[CU Main
######]
Conference mode could not be changed
(“denied”) because the value is out of the
permissible range
Set Floor Mix=##
denied => Value out
of range(##..##)
[CU Main
######]
Automatic volume reduction could not be
changed because the value is out of the
permissible range
Set Floor Volume=##
denied => Value out
of range(##..##)
[CU Main
######]
Volume of the floor channel could not be
changed (“denied”) because the value is out
of the permissible range
Set Microphone
limit=##
denied => Value out
of range(##..##)
[CU Main
######]
Number of speakers who can take the floor
simultaneously could not be changed
(“denied”) because the value is out of the
permissible range
Set Operating
Mode=##
denied => Value out
of range(##..##)
[CU Main
######]
Operating mode of the central unit (e.g.
initialization mode or conference mode)
could not be changed (“denied”) because
the value is out of the permissible range
Set Premonition
Time=##s denied =>
Value out of
range(0..##s)
[CU Main
######]
Advance warning time could not be changed
(“denied”) because the value is out of the
permissible range
Set Request Limit=##
denied => Value out
of range(##..##)
[CU Main
######]
Maximum number of requests to speak
could not be changed (“denied”) because
the value is out of the permissible range