ADN Media Control Protocol

Table Of Contents
Detailed List of Commands
14|ADN MediaCtrl Protocol
MaxSpeakReqListLength (Get, Update, Set)
The maximal number of microphones being in request status.
Parameters
MicBatteryStatus (Get, Update)
Remaining battery power of the microphone with the given serial number.
Parameters
MicButton (Set)
Toggle activation/deactivation of microphone at bus position [BusPos] (request MicOn in case
mic is off and vice versa).
Parameters
MicButtonSN (Set)
Toggle activation/deactivation of microphone with the given serial number (request MicOn in
case mic is off and vice versa). Example:
MicButtonSN D1100023;
(Virtually press the micro-
phone button of wired DU with serial number D1100023.) See string parameters on p. 4 for
details.
Parameters
MicExtPowerSupply (Get, Update)
If ‘1’ the wireless speaking unit has an external power supply.
Parameters
MicRfStatus (Get, Update)
The Rf status of the wireless speaking unit (percent).
Parameters
Name Value range Required
for get
Sent as
update
Required
for set
Relative
change
maxNum min = 1
max = 10
no yes yes allowed
Name Value range Required for get Sent as update
serialNumber string value yes yes
micBatteryStatus min = 0
max = 100
no yes
Name Value range Required for get Relative change
BusPos min = 1 yes not allowed
Name Value range Required for get Relative change
serialNumber string value yes not allowed
Name Value range Required for get Sent as update
serialNumber string value yes yes
extPowerSupply min = 0
max = 1
no yes
Name Value range Required for get Sent as update
serialNumber string value yes yes
rfStatus min = 0
max = 100
no yes