ADN Media Control Protocol

ADN MediaCtrl Protocol|13
Detailed List of Commands
HdRecordIsActive (Get, Update, Set)
(De)activate hard disc recording.
Parameters
HdRecordError (Get, Update)
The error parameter is 1, if HD recording is active but there is some hard disk error.
In case HD recording is not active the error parameter is always 0.
Parameters
LapsedTalkTime (Get, Update)
Lapsed talk time in seconds of microphone at bus position [BusPos].
Parameters
LapsedTalkTimeSN (Get, Update)
Lapsed talk time in seconds of microphone with the given serial number.
Example (get): LapsedTalkTimeSN D1100023 ;
Parameters
LimitOfTalkTime (Get, Update, Set)
Limit of talk time.
If value is greater than ‘0’, it defines the limit in minutes.
If value is set to ‘0’, the talk time is unlimited.
Parameters
MaxOpenMic (Get, Update, Set)
The maximum number of microphones that can be open at the same time.
Parameters
Name Value range Required
for get
Sent as
update
Required
for set
Relative
change
enable min = 0
max = 1
no yes yes not
allowed
Name Value range Required for get Sent as update
error min = 0
max = 1
no yes
Name Value range Required for get Sent as update
BusPos min = 0 yes yes
LapsedTT min = 0 no yes
Name Value range Required for get Sent as update
serialNumber string value yes yes
LapsedTT min = 0 no yes
Name Value range Required
for get
Sent as
update
Required
for set
Relative
change
limitTT min = 0
max = 60
no yes yes allowed
Name Value range Required
for get
Sent as
update
Required
for set
Relative
change
maxNum min = 1
max = 10
no yes yes allowed