ADN Media Control Protocol
Table Of Contents
- Content
- Glossary
- Protocol Basics
- Overview of Commands
- Detailed List of Commands
- Table of Parameters
- AllMicsOff (Set)
- AmRfChannel (Get, Update, Set)
- AmRfOutputPower (Get, Update, Set)
- AutoFreqSelection (Get, Update, Set)
- BlinkOnReq (Get, Update, Set)
- ClearDoesCleanRequestList (Get, Update, Set)
- ConferenceMode (Get, Update, Set)
- EnableSUwShutdown (Get, Update, Set)
- FloorEqualizerHigh (Get, Update, Set)
- FloorEqualizerMid (Get, Update, Set)
- FloorEqualizerLow (Get, Update, Set)
- FloorMix (Get, Update, Set)
- FloorVolume (Get, Update, Set)
- HdRecordIsActive (Get, Update, Set)
- HdRecordError (Get, Update)
- LapsedTalkTime (Get, Update)
- LapsedTalkTimeSN (Get, Update)
- LimitOfTalkTime (Get, Update, Set)
- MaxOpenMic (Get, Update, Set)
- MaxSpeakReqListLength (Get, Update, Set)
- MicBatteryStatus (Get, Update)
- MicButton (Set)
- MicButtonSN (Set)
- MicExtPowerSupply (Get, Update)
- MicRfStatus (Get, Update)
- MicStatus (Get, Update)
- MicStatusSN (Get, Update)
- OpenAccessMode (Get, Update, Set)
- PremonitionTime (Get, Update, Set)
- ReinitSystem (Set)
- SetCUDateTime (Set)
- SpeakerFeedbackSuppression (Get, Update, Set)
- SwitchableMicVolumeIsActive (Get, Update, Set)
- TalkTimeExpirationHardCutOff (Get, Update, Set)
- TalkTimeLimitIsActive (Get, Update, Set)
- XLRMixMinusIsActive (Get, Update, Set)
- XLRinStatus (Get, Update, Set)
- XLRinSensitivity (Get, Update, Set)
- XLRinEqHigh (Get, Update, Set)
- XLRinEqMid (Get, Update, Set)
- XLRinEqLow (Get, Update, Set)
- XLRoutStatus (Get, Update, Set)
- XLRoutVolume (Get, Update, Set)
- XLRoutEqHigh (Get, Update, Set)
- XLRoutEqMid (Get, Update, Set)
- XLRoutEqLow (Get, Update, Set)
- XLROutFeedbackSuppression (Get, Update, Set)
- Error Codes
Detailed List of Commands
12|ADN MediaCtrl Protocol
FloorEqualizerLow (Get, Update, Set)
Sets the dB (low range) of the floor equalizer (SU speakers).
Parameters
FloorMix (Get, Update, Set)
Sets the dB for Audio Gain Reduction.
‘FloorMix_DivByNumOfChanels’ is shown as ‘Linear Division’ in the ADN CU1 display.
Parameters
FloorVolume (Get, Update, Set)
Sets the floor volume (SU Speakers).
Parameters
Name Value range Required
for get
Sent as
update
Required
for set
Relative
change
eqValue 1 (EqRange_plus12dB)
2 (EqRange_plus11dB)
3 (EqRange_plus10dB)
4 (EqRange_plus09dB)
5 (EqRange_plus08dB)
6 (EqRange_plus07dB)
7 (EqRange_plus06dB)
8 (EqRange_plus05dB)
9 (EqRange_plus04dB)
10 (EqRange_plus03dB)
11 (EqRange_plus02dB)
12 (EqRange_plus01dB)
13 (EqRange_plus00dB)
14 (EqRange_minus01dB)
15 (EqRange_minus02dB)
16 (EqRange_minus03dB)
17 (EqRange_minus04dB)
18 (EqRange_minus05dB)
19 (EqRange_minus06dB)
20 (EqRange_minus07dB)
21 (EqRange_minus08dB)
22 (EqRange_minus09dB)
23 (EqRange_minus10dB)
24 (EqRange_minus11dB)
25 (EqRange_minus12dB)
no yes yes allowed
Name Value range Required
for get
Sent as
update
Required
for set
Relative
change
floorMix 1 (FloorMix_0_0dB)
2 (FloorMix_0_5dB)
3 (FloorMix_1_0dB)
4 (FloorMix_1_5dB)
5 (FloorMix_2_0dB)
6 (FloorMix_2_5dB)
7 (FloorMix_3_0dB)
8 (FloorMix_LinearDivision)
no yes yes allowed
Name Value range Required
for get
Sent as
update
Required
for set
Relative
change
volume min = 0
max = 32
no yes yes allowed