Quick Guide
Table Of Contents
- Contents
- For your safety
- The ADN CU1 central unit
- Package contents
- Components required for operation
- Product overview ADN CU1 central unit
- Structuring and controlling the conference system
- Preparing the ADN CU1 central unit for operation
- Setting up the conference system
- Setting up a small wired conference system with only the central unit
- Setting up a large wired conference system
- Setting up a wireless conference system
- Preparing to use the “Conference Manager” software
- Connecting external audio devices to the central unit
- Connecting a USB mass storage device for audio recordings to the central unit
- Using the ADN CU1 central unit
- Configuring the conference system
- Cleaning and maintaining the conference system
- Specifications ADN CU1
The ADN CU1 central unit
2|ADN CU1
The ADN CU1 central unit
The ADN CU1 central unit is part of the Sennheiser ADN conference system.
The central unit controls the operation of the entire conference system. For wired
operation, up to max. 40 ADN D1 delegate units and ADN C1 chairperson units can
be directly connected to the central unit. For larger wired conference systems with
up to max. 400 conference units, the central unit can also manage up to 15 ADN PS
power supplies which in turn supply power the wired conference units.
For wireless conferencing, you can operate up to 150 ADN-W C1 and ADN-W D1
wireless conference units. For this, you require at least one ADN-W AM antenna
module per central unit. With one antenna module, you can operate a maximum of
75 wireless conference units. Depending on room conditions, you may require sev-
eral antenna modules. Please note that you can connect a maximum of four
antenna modules to one central unit.
For configuring the conference system, you can either use the central unit’s oper-
ating menu or the “Conference Manager” software. However, the full functionality
of a wireless conference system can only be configured using the “Conference Man-
ager” software. The software also allows you to control and monitor conferences
via a graphical interface.
Overview of a wired conference system
ADN C1 and ADN D1 wired conference units and ADN-W C1 and ADN-W D1
wireless conference units can be combined arbitrarily as long as you ensure
correct set-up and cabling and comply with the specifications (a conference
system can comprise a total of 400 conference units of which up to 150 can
be wireless).
ADN PS ADN PS
“Conference Manager”
software
ADN CU1
max. 40
ADN D1/ADN C1
max. 15 ADN PS
max. 400
ADN D1/ADN C1
per ADN PS with standard
cabling a max. of 70
ADN D1/ADN C1
per ADN PS with redundant
ring cabling a max. of 40
ADN D1/ADN C1
Conferences with up to a
max. of 40 participants
Conferences with up to a max. of 400 participants