Instruction manual Set 880

Using the Set 880
Set 880 | 27
Selecting a hearing profile for sound enhancement
The hearing profiles allow you to alter the sound of the audio signal
in order to improve the speech intelligibility and to adjust the sound
to suit your preferences. The profiles are used to specifically change
certain frequency ranges by e.g. boosting or attenuating low-fre-
quency or high-frequency tones.
All hearing profiles feature a compression function which compen-
sates for volume differences by boosting the volume of quiet pas-
sages and reducing the volume of loud passages if necessary.
Displaying the activated hearing profile
The activated hearing profile is not permanently displayed.
To check the activate hearing profile:
E Switch the stethoset receiver on by putting it on (see page 21).
E Briefly press the Hearing profile button on the transmitter.
The currently activated hearing profile is displayed for 10 sec-
onds.
The balance setting is saved on the stethoset receiver. If you
are using several receivers with a transmitter, the respective
receivers are optimally adjusted to match the personal hear-
ing preferences of the users (e.g. you and your partner).
Please note that the personal hearing preferences can only be
adjusted when only stethoset receiver is connected to the
transmitter.
Activated
hearing
profile
Hearing profile LED
Sound enhancement Compression
–
No LED segment lit
The sound from the connected audio
source is reproduced unchanged.
no
Hearing
profile 1
1
st
LED segment lit
Low-frequency tones are slightly
boosted to provide a warm, full sound.
High-frequency tones are reproduced
less piercing and clanking.
yes
Hearing
profile 2
2
nd
LED segment lit
The sound from the connected audio
source is reproduced unchanged but
compression compensates for volume
differences.
yes
Hearing
profile 3
3
rd
LED segment lit
Low-frequency and high-frequency
tones are slightly boosted to provide a
warm and brilliant sound.
yes