Instruction manual Set 880
Table Of Contents
- Important safety instructions
- Package contents
- Product overview
- Putting the Set 880 into operation
- Setting up the transmitter
- Connecting the transmitter to audio sources
- Connecting the transmitter to the power supply system
- Charging the stethoset receiver’s rechargeable battery
- Displaying the remaining operating time of the rechargeable battery
- Using the charging reminder function
- Selecting and replacing the ear pads
- Using the Set 880
- Cleaning and maintaining the Set 880
- Using additional functions
- If a problem occurs ...
- Specifications
- Manufacturer Declarations
- Warranty
- In compliance with the following requirements
- Statements regarding FCC and Industry Canada
- RF Radiation Exposure Information
- Information sur l’exposition aux rayonnements radio fréquence (RF)
- Cet émetteur ne doit pas être positionné à proximité d‘une autre antenne ou d‘un autre émetteur, ni utilisé avec une autre antenne ou un autre émetteur.
- Trademarks
Using the Set 880
Set 880 | 23
Switching between the audio sources
If e.g. a TV and a stereo hi-fi system are connected simultaneously
to the transmitter, you can switch between the two audio sources.
The selected audio source is not permanently displayed.
To check the selected audio source:
E Switch the stethoset receiver on by putting it on (see page 21).
E Briefly press the
Audio source
button on the transmit-
ter.
The currently selected audio source is displayed for 10 seconds:
To change the audio source:
E Press the
Audio source
button on the transmitter for 2
seconds.
Playback switches between analog and digital.
Display Selected audio source
1
st
LED segment lit
The audio source connected to the
Analog 3.5 mm In audio input is
selected.
5
th
LED segment lit
The audio source connected to the
Digital Optical In audio input is
selected.
2s
Digital
Audio
Analog
Audio