Instruction manual Set 880
Table Of Contents
- Important safety instructions
- Package contents
- Product overview
- Putting the Set 880 into operation
- Setting up the transmitter
- Connecting the transmitter to audio sources
- Connecting the transmitter to the power supply system
- Charging the stethoset receiver’s rechargeable battery
- Displaying the remaining operating time of the rechargeable battery
- Using the charging reminder function
- Selecting and replacing the ear pads
- Using the Set 880
- Cleaning and maintaining the Set 880
- Using additional functions
- If a problem occurs ...
- Specifications
- Manufacturer Declarations
- Warranty
- In compliance with the following requirements
- Statements regarding FCC and Industry Canada
- RF Radiation Exposure Information
- Information sur l’exposition aux rayonnements radio fréquence (RF)
- Cet émetteur ne doit pas être positionné à proximité d‘une autre antenne ou d‘un autre émetteur, ni utilisé avec une autre antenne ou un autre émetteur.
- Trademarks
Putting the Set 880 into operation
Set 880 | 11
Connecting the transmitter to audio sources
You can connect the transmitter to a digital and/or an analog audio
source (e.g. a TV and a stereo hi-fi system) and switch between the
audio sources/inputs.
E Switch your audio source off before connecting the transmitter.
E Check the connection possibilities of your audio source (audio
output, usually marked “OUT”).
E Select the corresponding connection cable and, if necessary, a
suitable adapter
E To connect the transmitter to your audio source, refer to the con-
nection diagram suitable for your audio source (see the follow-
ing chapters). Follow the color codings on the transmitter and on
the cables.
You can also refer to the beginner’s video guides on how to
connect your digital wireless headphone system to a TV:
www.sennheiser.com/how-to-videos.
Connection possibilities of the
audio source
Color coding
on the
transmitter
Connection cable
Page
Optical (digital) Optical digital cable 12
3.5 mm jack socket
(analog)
Stereo audio cable 13
RCA (analog)
Stereo audio cable with RCA adapter
(3.5 mm jack socket to 2 RCA plugs)
14
SCART (analog)
Stereo audio cable with SCART
adapter (3.5 mm jack socket to
SCART connector; optional
accessory)
14
A
B
C
L
D
Accessories and adapters are available from your local Senn-
heiser partner.