Instruction manual Set 860
Table Of Contents
- Important safety instructions
- Package contents
- Product overview
- Putting the Set 860 into operation
- Setting up the transmitter
- Connecting the transmitter to an audio source
- Connecting the transmitter to the power supply system
- Charging the stethoset receiver’s rechargeable battery
- Displaying the remaining operating time of the rechargeable battery
- Using the charging reminder function
- Selecting and replacing the ear pads
- Using the Set 860
- Cleaning and maintaining the Set 860
- Using additional functions
- If a problem occurs ...
- Specifications
- Manufacturer Declarations
- Warranty
- In compliance with the following requirements
- Statements regarding FCC and Industry Canada
- RF Radiation Exposure Information
- Information sur l’exposition aux rayonnements radio fréquence (RF)
- Cet émetteur ne doit pas être positionné à proximité d‘une autre antenne ou d‘un autre émetteur, ni utilisé avec une autre antenne ou un autre émetteur.
- Trademarks
Using additional functions
30 | Set 860
Switching between stereo and mono operation
With certain sound recordings, voice or audio signals are recorded
on one channel only (right or left stereo channel). This can result in
a loss of individually recorded voices or instruments, especially
when you have changed the balance setting.
In order to avoid this effect, you can switch between stereo and
mono operation.
This setting is saved on the transmitter, independent of the ste-
thoset receiver you are using.
Activating stereo operation
E Simultaneously press the balance button R (right) and the
Hear-
ing profile
button on the transmitter for 2 seconds.
The LED segment 1 and the
Battery
LED as well as the LED
segment 3 and the
Hearing profile
LED light up for 10 sec-
onds. Stereo operation is activated.
Activating mono operation
E Simultaneously press the balance button L (left) and the
Hearing
profile
button on the transmitter for 2 seconds.
The LED segments 1, 2 and 3 light up for 10 seconds. Mono oper-
ation is activated.
2s
STEREO
2s
MONO