Datasheet

! The transmitter can only be switched off when the lock mode is

deactivated (

see “The automatic lock mode (autolock function)” on

page 13).

Note:

! When in the setting mode of the operating menu, the ON/OFF button

 will cancel your entry (ESC function).

Doing a frequency check

The transmitter has a frequency check mode that prevents the transmitter

transmitting on an unwanted frequency after switch-on.

To change the transmission fr equency, proceed as follows:

 Release the ON/OF F button .

 Immediately (i.e. within five seconds) press the multi-function

switch

 (switch position SET) twice.

 You are now in the setting mode of the “CHAN” or “TUNE” menu where

you can change the transmission frequency (

see “Adjustment tips for

the operating menu” on page 21).

 To switch the transmitter off, press the

ON/OFF

button 

until “OFF” appears on

the LC display panel



The red LED



and the LC display panel go

off.

 When switching on the transmitter, keep

the ON/OFF

button  pressed.

The current frequency is displayed on the

LC display panel

 without the transmit-

ter actually transmitting.

 If the displayed frequency is the correct

one, release the ON/OFF

button .

After five seconds, “RF”  appears on

the LC display panel and the transmitter

is transmitting.

MHz

