Product specification e 604

PRODUCT SPECIFICATION
evolution wired
e 604
1/2
FEATURES
• Rugged reinforced glass fiber body
• Low sensitivity to impact and handling noise
• Very high sound pressure handling capability
(in excess of 160 dB)
• Low distortion microphone
• Hum compensating coil
• Easy to position due to compact design
• Integral stand mount
DELIVERY INCLUDES
• e 604
• pouch
• MZH 604 drum clip
• quick guide
• safety guide
The frequency response and cardioid pick-up pattern are
optimized for drum sets and other percussion instrument
miking, while also producing exceptional results on all
forms of brass and woodwind.
An integral stand mount screws directly onto mic stands
and included clip attaches mic to rims of drums. Very high
sound pressure level handling, in excess of 160 dB, is com-
bined with a balanced, clear, low distortion signal.
Lightweight voice coil provides extended high frequency
and rapid transient response. A tough reinforced glass
fiber body takes the knocks and shocks.
SPECIFICATIONS
Transducer principle dynamic
Frequency response 40 - 18,000 Hz
Pick-up pattern cardioid
Sensitivity (free field, at
1 kHz)
1.8 mV/Pa
Nominal impedance (at
1 kHz)
350 Ω
Min. terminating impedance 1 kΩ
Connector XLR-3
Dimensions ⌀ 33 x 59 mm
Weight 60 g
ARCHITECT‘S SPECIFICATION
The instrument microphone shall be a dynamic cardioid
designed for use with drums and percussion as well as
brass and woodwind instruments.
It shall have a compact design and a rugged reinforced
glass fiber body and shall feature an integral stand mount.
The microphone shall be fitted with a hum compensating
coil. The frequency response shall be 40 Hz – 18,000 Hz
and the sensitivity (free field, no load) shall be 1.8 mV/Pa at
1 kHz. Nominal impedance shall be 350 Ω, with a min. ter-
minating impedance of 1 kΩ. The microphone shall provide
a 3-pin XLR connector. Dimensions shall be 33 x 59 mm
(1.3" x 2.32"). Weight without cable shall be 60 grams
(2.12 oz).
The microphone shall be the Sennheiser e 604.