User Guide

40
Using the components
Special bodypack transmitter/radio
microphone settings
The following special settings can only be made via
the bodypack transmitter’s/radio microphone’s oper-
ating menu. An overview of this operating menu is
given from page 49 onwards.
Switching the bodypack transmitter’s line
input on/off
You can connect an audio source such as a CD player,
MP3 player, etc. to the bodypack transmitter’s line
input. If you have connected an audio source, you then
have to switch on the line input as follows:
 Press the SET button .
The operating menu appears and the first menu
item “CHAN” flashes on the display.
 Repeatedly press the / rocker button  in the
 direction until “LINE” flashes on the display.
 Press the SET button .
If the line input is switched off, “LINE.OFF” flashes
on the display; if the line input is switched on,
“LINE.ON” flashes on the display.
 Press the / rocker button  to change the
setting.
 Press the SET button  to permanently store the
setting.
“STORED” briefly appears on the display.
 Adjust the sensitivity of the line input to match the
connected audio source as described in the follow-
ing section.