User Guide

27
Putting the components into operation
Note:
Always charge the accupack in the charging
compartment  of the charging case (see “Charg-
ing the BA 2015 accupack” on page 33).
Inserting and replacing the batteries/accupack of
the bodypack transmitter
For powering the bodypack transmitter, you can
either use the rechargeable BA 2015 accupack  or
two 1.5 V AA size batteries. NB: Do not use any other
rechargeable batteries!
 Push the two battery compartment catches  and
open the battery compartment cover .
 Insert the BA 2015 accupack  or the batteries as
shown in the diagram on the left. Please observe
correct polarity when inserting the accupack/
batteries.
 Close the battery compartment cover .
Connecting a microphone to the bodypack
transmitter
Note:
Suitable Sennheiser microphones are listed on
page 8.
 Connect the microphone to the microphone
input  of the bodypack transmitter.
 Lock the plug by screwing down the coupling ring.
 Adjust the sensitivity of the microphone input as
described on page 42.

