User Manual
Table Of Contents
- Important safety instructions
- Package contents
- Product overview
- Getting started
- Using the headphones
- Information on the rechargeable battery and the charging process
- Charging the headphones' rechargeable battery
- Connecting the headphones to a Bluetooth device
- Information on the Bluetooth wireless connection
- Pairing the headphones with a Bluetooth device using NFC
- Pairing the headphones with a Bluetooth device
- Disconnecting the headphones from a Bluetooth device
- Installing the Smart Control app
- Switching the headphones on
- Unfolding the ear cups without switching the headphones on
- Switching the headphones on without Bluetooth wireless connection (flight mode)
- Switching the headphones off
- Putting the headphones on and adjusting the headband
- Retrieving information on the battery charge status
- Adjusting the volume
- Information on active noise cancellation ANC
- Activating/deactivating the active noise cancellation ANC
- Setting the ANC mode
- Listening of ambient noise or conversations - activating/deactivating the Transparent Hearing function
- Adjusting the Transparent Hearing function
- Listening to music using the headphones
- Controlling music playback
- Making phone calls using the headphones
- Using the voice assistant/voice dialing
- Using Amazon Alexa as voice assistant
- Using the Smart Pause function
- Adjusting sound effects/the equalizer
- Setting the voice prompts/beep sounds
- Using TILE to locate the headphones
- Using the audio cable/activating flight mode
- Connecting the headphones using the audio cable
- Connecting the headphones using the USB cable
- Storing and transporting the headphones
- Care and maintenance
- FAQ/If a problem occurs ...
- Leaving the Bluetooth transmission range
- Deleting the Bluetooth pairing list of the headphones
- Restarting the headphones
- Resetting the headphones to the factory default settings/Reset
- The Smart Control app allows you to reset the headphones to the factory default settings (e.g. EQ settings, ANC mode).
- If the TILE function is activated (> 28), the TILE settings are not reset. To reset the TILE settings, deactivate the headphones in the TILE app.
- Specifications
- Manufacturer Declarations
Specifications
MOMENTUM Wireless M3AEBTXL | 35
Specifications
MOMENTUM Wireless M3AEBTXL
Bluetooth
NFC
Ear coupling circum-aural
Transducer principle dynamic, closed-back
Transducer 42 mm
Frequency response 6 Hz to 22 kHz
Sound pressure level (SPL) 99 dB SPL/-10 dB FS (via Bluetooth)
according to EN 50332-2
118 dB SPL/1 V/1 kHz (via cable)
Impedance active mode: 470 Ω
passive mode: 100 Ω
THD (1 kHz, 100 dB SPL) < 0.3 %
Noise cancellation ANC technology with 4 pick-up
microphones
Pick-up pattern
(speech audio)
2-mic beamforming array
Power supply built-in rechargeable lithium-polymer
battery: 3,7 V, 600-700 mAh
USB charging: 5 V⎓, 330 mA
Charging time of
rechargeable battery
approx. 3 hours
Operating time 17 hours (Bluetooth and ANC
activated)
Temperature range operation: 0 to +55 °C
charging: 0 to +40 °C
storage: –25 to +70 °C
Relative humidity operation: 25 to 75%, non condensing
storage: 10 to 90%
Weight (headphones) approx. 305 g
Magnetic field strength 10.5 mT
Version Bluetooth 5.0 compatible, class 1, BLE
Transmission frequency 2,400 to 2,483.5 MHz
Modulation GFSK, π/4 DQPSK, 8DPSK
Output power 10 mW (max)
Profiles HSP, HFP, AVRCP, A2DP, DIS, BAS
Codec aptX, aptX LL, AAC, SBC
Device name MOMENTUM 3
LE-MOMENTUM 3 (Bluetooth Low
Energy only)
Frequency 13.56 MHz
Modulation ASK
Output power within 500 μV/m