User Manual
Table Of Contents
- Important safety instructions
- Package contents
- Product overview
- Getting started
- Using the headphones
- Information on the rechargeable battery and the charging process
- Charging the headphones' rechargeable battery
- Connecting the headphones to a Bluetooth device
- Information on the Bluetooth wireless connection
- Pairing the headphones with a Bluetooth device using NFC
- Pairing the headphones with a Bluetooth device
- Disconnecting the headphones from a Bluetooth device
- Installing the Smart Control app
- Switching the headphones on
- Unfolding the ear cups without switching the headphones on
- Switching the headphones on without Bluetooth wireless connection (flight mode)
- Switching the headphones off
- Putting the headphones on and adjusting the headband
- Retrieving information on the battery charge status
- Adjusting the volume
- Information on active noise cancellation ANC
- Activating/deactivating the active noise cancellation ANC
- Setting the ANC mode
- Listening of ambient noise or conversations - activating/deactivating the Transparent Hearing function
- Adjusting the Transparent Hearing function
- Listening to music using the headphones
- Controlling music playback
- Making phone calls using the headphones
- Using the voice assistant/voice dialing
- Using Amazon Alexa as voice assistant
- Using the Smart Pause function
- Adjusting sound effects/the equalizer
- Setting the voice prompts/beep sounds
- Using TILE to locate the headphones
- Using the audio cable/activating flight mode
- Connecting the headphones using the audio cable
- Connecting the headphones using the USB cable
- Storing and transporting the headphones
- Care and maintenance
- FAQ/If a problem occurs ...
- Leaving the Bluetooth transmission range
- Deleting the Bluetooth pairing list of the headphones
- Restarting the headphones
- Resetting the headphones to the factory default settings/Reset
- The Smart Control app allows you to reset the headphones to the factory default settings (e.g. EQ settings, ANC mode).
- If the TILE function is activated (> 28), the TILE settings are not reset. To reset the TILE settings, deactivate the headphones in the TILE app.
- Specifications
- Manufacturer Declarations
Care and maintenance
MOMENTUM Wireless M3AEBTXL | 31
Care and maintenance
▷ Clean the non-leather parts of the product only with a soft, dry
cloth
Cleaning and maintaining leather parts
Regularly clean and maintain the leather parts to keep the product in
pristine condition and increase its lifespan.
▷ Gently wipe leather parts periodically with a clean, soft cloth
dampened with water.
▷ Do not use leather polish, detergents or harsh soaps.
▷ Do not store the headphones in a damp or humid environment.
Replacing the ear pads
For reasons of hygiene, you should replace the ear pads from time to
time. Spare ear pads are available from your Sennheiser partner.
To remove the old ear pads:
▷ Pull the ear pad away from the ear cup.
If the retaining ring remains on the ear cup when the ear pad is
removed:
▷ Carefully loosen the retaining ring. If necessary, use a slotted
screwdriver to loosen the retaining ring.
To place a new ear pad on the ear cup:
▷ Assign the ear pads to the right and left side. The seam of the ear
pad has to point downwards.
CAUTION
Liquids can damage the electronics of the product!
Liquids entering the housing of the product can cause a short-circuit
and damage the electronics.
▷ Keep all liquids far away from the product.
▷ Do not use any solvents or cleansing agents.