User Manual

Using the headphones
28 | MOMENTUM Wireless M3AEBTXL
Setting the voice prompts/beep sounds
To be able to set the voice prompts and beep sounds, you require the
Smart Control app (>
15).
▷ You can change the language of the voice prompts, choose
between voice prompts and beep sounds, or deactivate the status
messages with a few exceptions (e.g. rechargeable battery is
empty).
Using TILE to locate the headphones
The TILE function allows you to locate the headphones at any time.
If, for example, you have misplaced the headphones, the TILE func
-
tion allows you to find them again quickly. For this purpose, the head-
phones and the smartphone (with the installed TILE app) use Blue-
tooth frequencies.
▷ Create a TILE user account and register the MOMENTUM Wire-
less via the TILE app.
Using the audio cable/activating flight
mode
If you connect the audio cable, flight mode is activated and the Blue-
tooth wireless connection is deactivated.
Use the audio cable when:
• wireless transmission is not allowed, e.g. during aircraft take-off
and landing,
• the headphone's rechargeable battery is empty,
• your audio source doesn't offer a Bluetooth connection.
The functions for controlling music and/or calls or voice assistance
are not possible. The active noise cancellation ANC can be fully used
provided that the rechargeable battery is charged.
You can also activate the flight mode without connecting an audio
cable to the headphones (>
17).
Connecting the headphones using the
audio cable
▷ Connect the 2.5 mm jack plug of the audio cable to the head-
phones' audio socket until it clicks into place. Secure the jack plug
by turning it clockwise.
The flight mode is activated and the Bluetooth connection is dis-
abled.
▷ Connect the 3.5 mm jack plug to the audio output of your smart-
phone.
To disconnect the audio cable:
▷ Turn the jack plug counterclockwise and carefully pull it off.