User Manual
Table Of Contents
- Important safety instructions
- Package contents
- Product overview
- Getting started
- Using the headphones
- Information on the rechargeable battery and the charging process
- Charging the headphones' rechargeable battery
- Connecting the headphones to a Bluetooth device
- Information on the Bluetooth wireless connection
- Pairing the headphones with a Bluetooth device using NFC
- Pairing the headphones with a Bluetooth device
- Disconnecting the headphones from a Bluetooth device
- Installing the Smart Control app
- Switching the headphones on
- Unfolding the ear cups without switching the headphones on
- Switching the headphones on without Bluetooth wireless connection (flight mode)
- Switching the headphones off
- Putting the headphones on and adjusting the headband
- Retrieving information on the battery charge status
- Adjusting the volume
- Information on active noise cancellation ANC
- Activating/deactivating the active noise cancellation ANC
- Setting the ANC mode
- Listening of ambient noise or conversations - activating/deactivating the Transparent Hearing function
- Adjusting the Transparent Hearing function
- Listening to music using the headphones
- Controlling music playback
- Making phone calls using the headphones
- Using the voice assistant/voice dialing
- Using Amazon Alexa as voice assistant
- Using the Smart Pause function
- Adjusting sound effects/the equalizer
- Setting the voice prompts/beep sounds
- Using TILE to locate the headphones
- Using the audio cable/activating flight mode
- Connecting the headphones using the audio cable
- Connecting the headphones using the USB cable
- Storing and transporting the headphones
- Care and maintenance
- FAQ/If a problem occurs ...
- Leaving the Bluetooth transmission range
- Deleting the Bluetooth pairing list of the headphones
- Restarting the headphones
- Resetting the headphones to the factory default settings/Reset
- The Smart Control app allows you to reset the headphones to the factory default settings (e.g. EQ settings, ANC mode).
- If the TILE function is activated (> 28), the TILE settings are not reset. To reset the TILE settings, deactivate the headphones in the TILE app.
- Specifications
- Manufacturer Declarations
Using the headphones
22 | MOMENTUM Wireless M3AEBTXL
* default setting
Listening of ambient noise or
conversations - activating/deactivating
the Transparent Hearing function
The Transparent Hearing function allows you to still hear ambient
noise or to communicate without having to remove the headphones
when ANC is activated. This allows you to hear e.g. announcements
in the train or aircraft or to have short conversations.
▷ Slide the ANC switch to the lower position and release it to acti-
vate Transparent Hearing.
You hear two beeps. The Transparent Hearing mode set in the
Smart Control app is activated (>
22). You can hear ambient
sounds without having to remove the headphones.
To deactivate Transparent Hearing:
▷ Slide the ANC switch to the lower position again and release it.
You hear one beep. The ANC mode set in the Smart Control app
is activated (>
21).
Adjusting the Transparent Hearing
ANC mode
Reduction of low-frequency
noise and background noise
Used ANC
microphones in the
ear cups
Application
“Max” * maximum reduction directed toward the
ear and directed
toward the outside
in noisy environments such
as aircraft/traffic
“Anti Wind” slight reduction without
disturbing wind or
movement noise
directed toward the
ear
outdoors and on the go
“Anti Pressure” comfortable reduction
without feeling pressure in
the ears
directed toward the
outside
at home or in a hotel
ON
OFF