User Manual
Table Of Contents
- Important safety instructions
- Package contents
- Product overview
- Getting started
- Using the headphones
- Information on the rechargeable battery and the charging process
- Charging the headphones' rechargeable battery
- Connecting the headphones to a Bluetooth device
- Information on the Bluetooth wireless connection
- Pairing the headphones with a Bluetooth device using NFC
- Pairing the headphones with a Bluetooth device
- Disconnecting the headphones from a Bluetooth device
- Installing the Smart Control app
- Switching the headphones on
- Unfolding the ear cups without switching the headphones on
- Switching the headphones on without Bluetooth wireless connection (flight mode)
- Switching the headphones off
- Putting the headphones on and adjusting the headband
- Retrieving information on the battery charge status
- Adjusting the volume
- Information on active noise cancellation ANC
- Activating/deactivating the active noise cancellation ANC
- Setting the ANC mode
- Listening of ambient noise or conversations - activating/deactivating the Transparent Hearing function
- Adjusting the Transparent Hearing function
- Listening to music using the headphones
- Controlling music playback
- Making phone calls using the headphones
- Using the voice assistant/voice dialing
- Using Amazon Alexa as voice assistant
- Using the Smart Pause function
- Adjusting sound effects/the equalizer
- Setting the voice prompts/beep sounds
- Using TILE to locate the headphones
- Using the audio cable/activating flight mode
- Connecting the headphones using the audio cable
- Connecting the headphones using the USB cable
- Storing and transporting the headphones
- Care and maintenance
- FAQ/If a problem occurs ...
- Leaving the Bluetooth transmission range
- Deleting the Bluetooth pairing list of the headphones
- Restarting the headphones
- Resetting the headphones to the factory default settings/Reset
- The Smart Control app allows you to reset the headphones to the factory default settings (e.g. EQ settings, ANC mode).
- If the TILE function is activated (> 28), the TILE settings are not reset. To reset the TILE settings, deactivate the headphones in the TILE app.
- Specifications
- Manufacturer Declarations
Using the headphones
16 | MOMENTUM Wireless M3AEBTXL
Switching the headphones on
▷ Unfold the two ear cups (right and left).
The joints click into place. The headphones switch on. You hear
the voice prompt “Power on” and the LED lights up green for
2
seconds.
If a paired Bluetooth device is within the transmission range, you
hear the voice prompt “Device (1) connected”. The LED lights up
blue for 2 seconds.
WARNING
Danger of hearing damage due to high volume levels!
Listening at high volume levels can lead to permanent
hearing defects.
▷ Before putting the headphones on, adjust the volume
to a low level (>
20).
▷ Do not continuously expose yourself to high volume
levels.
WARNING
Risk of getting caught when unfolding the ear cups!
When the ear cups are unfolded, you may get caught in
the joints and injure yourself.
▷ When unfolding the ear cups, keep sufficient distance
to the joints so that no skin is caught in the joints.
Make sure that Bluetooth is already activated on your Blue-
tooth device when switching on the headphones.
If Bluetooth is activated and the headphones cannot find a
paired Bluetooth device within a few minutes, you hear the
voice prompt “No device found”. The LED lights up red for 2
seconds. The headphones switch to standby mode.
Connected
No connection
“Device (1)
connected“
“No device
found“
“Power on“
OFF
Click
ON
Power on
2s
2s
2s