User Manual
Table Of Contents
- Important safety instructions
- Package contents
- Product overview
- Getting started
- Using the headphones
- Information on the rechargeable battery and the charging process
- Charging the headphones' rechargeable battery
- Connecting the headphones to a Bluetooth device
- Information on the Bluetooth wireless connection
- Pairing the headphones with a Bluetooth device using NFC
- Pairing the headphones with a Bluetooth device
- Disconnecting the headphones from a Bluetooth device
- Installing the Smart Control app
- Switching the headphones on
- Unfolding the ear cups without switching the headphones on
- Switching the headphones on without Bluetooth wireless connection (flight mode)
- Switching the headphones off
- Putting the headphones on and adjusting the headband
- Retrieving information on the battery charge status
- Adjusting the volume
- Information on active noise cancellation ANC
- Activating/deactivating the active noise cancellation ANC
- Setting the ANC mode
- Listening of ambient noise or conversations - activating/deactivating the Transparent Hearing function
- Adjusting the Transparent Hearing function
- Listening to music using the headphones
- Controlling music playback
- Making phone calls using the headphones
- Using the voice assistant/voice dialing
- Using Amazon Alexa as voice assistant
- Using the Smart Pause function
- Adjusting sound effects/the equalizer
- Setting the voice prompts/beep sounds
- Using TILE to locate the headphones
- Using the audio cable/activating flight mode
- Connecting the headphones using the audio cable
- Connecting the headphones using the USB cable
- Storing and transporting the headphones
- Care and maintenance
- FAQ/If a problem occurs ...
- Leaving the Bluetooth transmission range
- Deleting the Bluetooth pairing list of the headphones
- Restarting the headphones
- Resetting the headphones to the factory default settings/Reset
- The Smart Control app allows you to reset the headphones to the factory default settings (e.g. EQ settings, ANC mode).
- If the TILE function is activated (> 28), the TILE settings are not reset. To reset the TILE settings, deactivate the headphones in the TILE app.
- Specifications
- Manufacturer Declarations
Using the headphones
MOMENTUM Wireless M3AEBTXL | 13
Pairing the headphones with a Bluetooth
device using NFC
1. Activate NFC on your Bluetooth device.
2. Switch the headphones on (> 16).
3. Place your Bluetooth device close (less than 3 cm) to the NFC
antenna in the right ear cup of the headphones.
You hear the voice prompt “Pairing” and the LED flashes blue and
red.
4. Click “Yes” if a confirmation dialog for Bluetooth pairing appears
on the screen of your Bluetooth device (this step may vary
depending on your Bluetooth device).
If pairing was successful, you hear the voice prompts “Pairing
successful” and “Device (1) connected”. The LED lights up blue for
2 seconds.
< 3 cm
Pairing
ON
ON
1 2
3 4
ON
MOMENTUM 3
Connected
2s
“Pairing“
“Device (1)
connected“
“Pairing
successful“
ONOFF
Click