User Manual
Table Of Contents
- Important safety instructions
- Package contents
- Product overview
- Getting started
- Using the headphones
- Information on the rechargeable battery and the charging process
- Charging the headphones' rechargeable battery
- Connecting the headphones to a Bluetooth device
- Information on the Bluetooth wireless connection
- Pairing the headphones with a Bluetooth device using NFC
- Pairing the headphones with a Bluetooth device
- Disconnecting the headphones from a Bluetooth device
- Installing the Smart Control app
- Switching the headphones on
- Unfolding the ear cups without switching the headphones on
- Switching the headphones on without Bluetooth wireless connection (flight mode)
- Switching the headphones off
- Putting the headphones on and adjusting the headband
- Retrieving information on the battery charge status
- Adjusting the volume
- Information on active noise cancellation ANC
- Activating/deactivating the active noise cancellation ANC
- Setting the ANC mode
- Listening of ambient noise or conversations - activating/deactivating the Transparent Hearing function
- Adjusting the Transparent Hearing function
- Listening to music using the headphones
- Controlling music playback
- Making phone calls using the headphones
- Using the voice assistant/voice dialing
- Using Amazon Alexa as voice assistant
- Using the Smart Pause function
- Adjusting sound effects/the equalizer
- Setting the voice prompts/beep sounds
- Using TILE to locate the headphones
- Using the audio cable/activating flight mode
- Connecting the headphones using the audio cable
- Connecting the headphones using the USB cable
- Storing and transporting the headphones
- Care and maintenance
- FAQ/If a problem occurs ...
- Leaving the Bluetooth transmission range
- Deleting the Bluetooth pairing list of the headphones
- Restarting the headphones
- Resetting the headphones to the factory default settings/Reset
- The Smart Control app allows you to reset the headphones to the factory default settings (e.g. EQ settings, ANC mode).
- If the TILE function is activated (> 28), the TILE settings are not reset. To reset the TILE settings, deactivate the headphones in the TILE app.
- Specifications
- Manufacturer Declarations
Using the headphones
26 | MOMENTUM Wireless M3AEBTXL
Putting an active call on hold
If you remove the headphones during a call, the call is automatically
put on hold and the microphone is muted. You hear the voice prompt
“Mute on” every 30 seconds.
To continue the call and reactivate the microphone, simply put the
headphones on again. You hear the voice prompt “Mute off”.
Using the voice assistant/voice dialing
▷ Press the voice assistant button once.
The available voice assistant of your smartphones is activated (*
depending on the system or app on your smartphone: Siri, Google
Assistant, ...).
▷ Ask the voice assistant your question or make a request.
To cancel the voice assistant/voice dialing:
▷ Press the voice assistant button 1x.
Using Amazon Alexa as voice assistant
To use Amazon Alexa as a voice assistant, you have to add the head-
phones to the Amazon Alexa app as a device once and then activate
Alexa via the settings of the
Sennheiser Smart Control app:
1. Make sure the headphones are connected to your smartphone via
Bluetooth (>
11).
2. Start the Sennheiser Smart Control app (> 15).
3. In the Smart Control app, open the settings for your headphones
and activate Amazon Alexa for the voice assistant button.
4. Start the Amazon Alexa app and select “Add Device”.
5. From the list of found devices, select “MOMENTUM 3”.
You can now use Amazon Alexa by pressing the voice assistant
button on your headphones.
If you want to use Amazon Alexa as your voice assistant, you
have to configure the headphones once (>
26).
ON/OFF
Siri, Google Assistent, ...
1x
PRESS