User Manual
Table Of Contents
- Important safety instructions
- Package contents
- Product overview
- Getting started
- Using the headphones
- Information on the rechargeable battery and the charging process
- Charging the headphones' rechargeable battery
- Connecting the headphones to a Bluetooth device
- Information on the Bluetooth wireless connection
- Pairing the headphones with a Bluetooth device using NFC
- Pairing the headphones with a Bluetooth device
- Disconnecting the headphones from a Bluetooth device
- Installing the Smart Control app
- Switching the headphones on
- Unfolding the ear cups without switching the headphones on
- Switching the headphones on without Bluetooth wireless connection (flight mode)
- Switching the headphones off
- Putting the headphones on and adjusting the headband
- Retrieving information on the battery charge status
- Adjusting the volume
- Information on active noise cancellation ANC
- Activating/deactivating the active noise cancellation ANC
- Setting the ANC mode
- Listening of ambient noise or conversations - activating/deactivating the Transparent Hearing function
- Adjusting the Transparent Hearing function
- Listening to music using the headphones
- Controlling music playback
- Making phone calls using the headphones
- Using the voice assistant/voice dialing
- Using Amazon Alexa as voice assistant
- Using the Smart Pause function
- Adjusting sound effects/the equalizer
- Setting the voice prompts/beep sounds
- Using TILE to locate the headphones
- Using the audio cable/activating flight mode
- Connecting the headphones using the audio cable
- Connecting the headphones using the USB cable
- Storing and transporting the headphones
- Care and maintenance
- FAQ/If a problem occurs ...
- Leaving the Bluetooth transmission range
- Deleting the Bluetooth pairing list of the headphones
- Restarting the headphones
- Resetting the headphones to the factory default settings/Reset
- The Smart Control app allows you to reset the headphones to the factory default settings (e.g. EQ settings, ANC mode).
- If the TILE function is activated (> 28), the TILE settings are not reset. To reset the TILE settings, deactivate the headphones in the TILE app.
- Specifications
- Manufacturer Declarations
Using the headphones
MOMENTUM Wireless M3AEBTXL | 17
Unfolding the ear cups without switching
the headphones on
▷ Press the multi-function button while unfolding the ear cups and
hold the button for at least 4 seconds.
The headphones remain switched off. You hear the voice prompts
“Power off”. The LED lights up red for 2 seconds.
To switch the headphones on again:
▷ Fold both ear cups inward and unfold them again.
The headphones switch on normally (> 16).
Switching the headphones on without
Bluetooth wireless connection (flight
mode)
▷ Press the voice assistant button while unfolding the ear cups and
hold the button for at least 4 seconds.
The headphones switch on without Bluetooth wireless connec-
tion. You hear the voice prompts “Power on” and “No connection”.
The LED lights up green for 2 seconds and then red for 2 seconds.
“Power off“
Click
OFF
2s
4s
Hold
If you connect the analog audio cable to the headphones, the
flight mode is also activated (Bluetooth wireless connection is
off) (>
28).
OFF
“Power on“
“No connection“
Click
ON
2s 2s
4s
Hold