User's Guide

True Wireless Earbuds
A300
User Guide
True Wireless Earbuds
A300
User Guide
1.Package Accessories 2.Product Introduction Usage Instructions
3. How to control 4. Product parameters
Tips
Turn on
Version
Support protocol
Workong distance
Workong me
Single earbud/charging
case baery capacity
Charging mes
Input current 5V/1A
50mAh/500mAh
10M(barrier-free)
HFP, HSP, A 2DP, AVRCP
5.0
4 mes
4 hours (Varies by volume level
and audio contents)
Turn off
Play/pause
Previous/next
Volume -/+
Reject the call
Acvate
voice assistant
Answer/
hang up the call
Take out from the charging case/press and
hold the MFB buon for 3 seconds.
Click the MFB buon.
Click the MFB buon during a call.
Double click L/R.
Triple-click L/R.
Press and hold the MFB buon for 2 seconds
during a call.
Long press L/R.
Put back into the charging case/press and
hold the MFB buon for 5 seconds in
standby state.
1. Please tear o the insulation lm on the charging pins and then
fully charge the earbuds before use.
2. How to Pair
a) Binaural mode instructions:
b) Mono mode instructions:
2* Bluetooth Earbuds
1* Charging Case
1* Charging Cable
1* User Manual
3* Pairs of Ear Tips
1. Inducve Touch Sensor
2. LED Indicators of Earbuds
3. Charging pins on Earbuds
4. Micro USB Charging Port
5. LED Indicator of Charging Case
Take the earbuds out of the charging case / press and hold the
mulfunconal touch buon (MFB) for 3 seconds to turn them on, the
LED indicator of the right earbud will flash red and white light aer the
le/right earbuds have paired; turn on the Bluetooth funcon of your
phone, search “A300” and click to pair. A voice prompt will follow aer
the earbuds and the phone have paired succefully.
Take the single earbud out of the charging case/press and hold the
MFB buon for 3 seconds to turn it on, the LED indicator will flash red
and white light; turn on the Bluetooth funcon of your phone, search
“A300” and click to pair. A voice prompt will follow aer successful
pairing.
Warranty void if the earphones submersion in the water keep the
earphones and the packaging out of reach of children.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protecon against harmful interference in a
residenal installaon. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instrucons, may cause
harmful interference to radio communicaons. However, there is no guarantee that interference
will not occur in a parcular installaon. If this equipment does cause harmful interference to
radio or television recepon, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separaon between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-Consult the dealer or an experienced radio/TV technician for help
Changes or modificaons not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operaon is subject to the following two
condions:
(1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operaon.
真无线立体声蓝牙耳机
A300
用户指南
真无线立体声蓝牙耳机
A300
用户指南
1.包装配件 2.产品说明 使用说明 3. 操作说明 4. 产品参数
温馨提示
开机
蓝牙版本
支持协议
有效距离
工作时长
耳机/充电盒
电池容量
充电次数
输入电流 5V/1A
50mAh/500mAh
10M(无障碍)
HFP, HSP, A 2DP, AVRCP
5.0
4 次
4小时（因音量和音频内容而异）
关机
播放或暂停
上/下一首
音量 -/+
拒接电话
启用语音助手
接听/挂断电话
双击左/右耳机多功能按键
长按多功能按键约2秒
单击多功能按键
长按左/右耳机多功能按键
双击左/右耳机多功能按键
单击多功能按键
将耳机放回充电盒或长按耳机多功能按
键约5秒
将耳机从充电盒取出或长按耳机多功能
按键约3秒
2. 如何配对
a) 双耳模式说明：
b) 单耳模式说明：
蓝牙耳机 X 2pcs
充电盒 X 1pcs
充电线 X 1pcs
用户指南 X 1pcs
耳塞 X 3pcs
1. 多功能按键
2. 耳机LED指示灯
3. 耳机充电口
4. Micro USB充电端口
5. 充电盒LED指示灯
1. 首次使用请撕下耳机充电口上的绝缘膜，然后将耳机充满电。
1. 将耳机从充电盒中取出或长按多功能按键约3秒将其打开；
2. 耳机自动开始配对, 左右耳机红白灯闪烁；
3. 在智能设备的蓝牙列表中选择“ A300 ”进行配对。
1. 将单个耳机从充电盒中取出或长按多功能按键约3秒将其打开
2. 耳机自动开始配对, 耳机红白灯闪烁；
3. 在智能设备的蓝牙列表中选择“ A300 ”进行配对。
请将耳机及包装放在儿童无法触及的地方，如果耳机进水，
保修无效。
书写纸