Instruction manual

SENKO cookers 2P extra rustik and glass – Instruction manual 35
a)
b)
c)
d)
e)
f)
g)
h)
 straighten the capillary that contains the probe and pull the capillary
downwards through the opening above the automatic regulator on
the inside of the cooker.
 maximum allowed probe temperature is 90C !
The warranty is void if the probe temperature exceeds the
maximum value !
 installation of a new regulator is executed by reversing the procedure, however,
special attention must be placed on inserting the probe through the canal and into the
boiler, probe capillary must not have an angle equalling or exceeding 90 at any
point, and all transitions must be executed in slight radius!
figure 21