Instruction manual

SENKO cookers 2P extra rustik and glass – Instruction manual 34
7. MAINTENANCE
Following years of use, the chamotte insulation (consumable material)
suffers damage that must be repaired with chamotte putty or refractory
concrete.
After several first hours of feeding, smear the fireproof paint on the
upper plate with a cloth imbued with edible oil.
Stainless material on the cookers is susceptible to slight colour
change due to high temperatures. Stainless materials are to be maintained
exclusively with stainless material maintenance agents in accordance with
the manufacturer’s instructions.
Handle securing bolt on upper and lower doors and firebox door
protective bolt to be tightened if necessary.
7.1. AUTOMATIC REGULATOR
When replacing the automatic regulator, adhere to the following procedure:
 remove the automatic regulator PVC wheel (12) by pulling it
towards yourself,
 remove the lid that is inside the fuel box (15) by releasing the 5
screws M8 (figure 21 a and b),
 pull the automatic regulator lid all the way back (figure 21 c and d
 broken pointers),
 through the opening that is between ash box (14) and automatic
regulator with wrench loosen the 4 screws M6 – figure 21 e i f,
 after the automatic regulator has been released, it is necessary to
pull the probe from the boiler,
 remove the protective lid which is located between the upper and
lower doors and remove the probe from the boiler–figure 21g and h,