operation manual
9WWW.SENIXTOOLS.EU
− that the vibration and noise emission during actual use of the power tool can dier from the declared
total value depending on the ways in which the tool is used; and
− of the need to identify safety measures to protect the operator that are based on an eimation of
exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the
times when the tool is switched o and when it is running idle in addition to the trigger time).
SPECIFICATIONS*
Model GTE2.5-L-EU
Rated Voltage 230V/50Hz
Rated input power 250 W
No-Load speed 12500 min
-1
Cutting width 250 mm
Line diameter
1.2 mm
Sound pressure level
L
PA
=83.5 dB(A)
K
PA
=3.0 dB(A)
Measured sound power level L
wA
=93.68 dB(A)
K
wA
=1.96 dB(A)
Guarantee sound power level 96 dB(A)
Vibration level
a
h
<2.5m/s
2
(K=1.5 m/s
2
)
Weight 1.13 kg
Information:
The declared vibration and noise total value has been measured in accordance with a standard test method and
may be used for comparing one tool with another;
The declared vibration and noise total value may also be used in a preliminary exposure assessment.
The vibration and noise emission during actual use of the power tool can differ from the declared total value
depending on the ways in which the tool is used; and it may be necessary to identify safety measures to protect
the operator that are based on an estimation of exposure in the actual conditions of use (taking into account all
parts running idle in addition to the trigger time).
* All specications are based on the latest product information available at the time of printing. We reserve the right
to make changes at any time without notice.
WARNING: