operation manual

2 WWW.SENIXTOOLS.EU
This operator’s manual describes safety and international symbols and pictographs that may appear on this product.
Read the operator’s manual for complete safety, assembly, operating and maintenance and repair information.
SAFETY & INTERNATIONAL SYMBOLS
The product complies with the applicable
European directives and an evaluation
method of conformity for these directives were
done.
Class II protection.
Do not use in rain or wet conditions.
Guaranteed sound power level value in
96 dB(A)
96
Caution / Warning.
Read the instruction manual.
Wear eye protection
Wear hearing protection
Wear respiratory protection
Wear safety helmet
Wear protective gloves.
Wear safety footwear.
Switch the product off and disconnect it from
the power supply before assembly, cleaning,
adjustments, maintenance, storage and
transportation.
Remove plug from the mains immediately if
the power cord/extension cord is damaged or
cut.
Waste electrical products should not be
disposed of with household waste. Please
recycle where facilities exist.
Check with your Local Authority or retailer for
recycling advice.
Don’t install or use any type of blade on the
unit displaying this symbol.
Beware of foot injury by cutting attachment.
The distance between the machine and
bystanders shall be at least 15m.
Warning. Cutting elements continue to
rotate after the engine turned off.
Keep a safe distance.
The operator is responsible for the safety
of others located in the working area of
the machine.
Do not use the machine while other
people, especially child or pets, are
nearby.
15m(50ft)
Risk of flying objects or debris
Be aware of that there is a risk of flying
objects and/or debris when using the machine
Keep bystanders away
Do not touch the line until it stops
completely when replacing new line.