operation manual

13WWW.SENIXTOOLS.EU
To extend the line press the spool onto the ground while
the unit is turning and the line will extend automatically.
For most effective grass trimming, ensure the machine
is operation at full speed and then use slow shallow
sweeps of the line, ensuring that you do not overload
the machine by cutting too fast or cutting through heavy
terrain (Fig.7) .
EXTENDING THE TRIMMING LINE
Fig. 7
Fig. 6
• To direct clippings away from the operator, tilt the
cutting head slightly down to the right; whenever
possible swing the trimmer in a left to right cutting
motion. There is an embossed arrow on the top of
the safety guard indicating the preferred left to right
direction of trimmer operation.
• Do not trim wet grass or weeds.
NOTE: Some line breakage will occur from:
• Check the area you wish to cut and remove any
objects that may be thrown up by the line.
• Check the safety equipment on the device before the
start of work.
• Start the product.
• Wear the device as prescribed using the carry strap
and hold with your right hand on the operating handle
• Gently push down fully on the fuel lever. Always cut at
full speed!
TIPS FOR BEST RESULTS
CUTTING TIPS
• Entanglement with foreign matter
• Normal line fatigue
• Attempting to cut thick vegetation
• Forcing the line into objects such as walls or fence
posts
Use only H05VV-F 2×0.75mm supply cord.
If the supply cord is damaged, it must be replaced by
the manufacturer, its service agent or similarly qualied
persons in order to avoid a hazard.
SUPPLY CORD
OPERATION