operation manual

11WWW.SENIXTOOLS.EU

REMOVING THE ATTACHMENT FROM THE

POWER HEAD AND THE HANDLE

For removing or changing the attachment:

1. Stop the unit.

2. Loose four self-tapping screws form attachment

shaft.

3. Take the power head shaft and handle shaft away

after removing four screws(Fig. 3).

Never attach or adjust any attachment while power

head is running. Failure to stop the unit may cause

serious personal injury.

WARNING:

ASSEMBLING THE AUXILIARY HANDLE

It is helpful and comfortable when using the auxiliary

handle.

1. Hold the product as in working condition.

2. Assemble the auxiliary handle to the slot of the cover

as shown below.

3. Tighten the screw to secure the auxiliary handle

(Fig. 4).

Fig. 3

Fig. 4

REMOVING THE AUXILIARY HANDLE

1. Hold the product as in working condition.

2. Loose the screw of the cover.

3. Take the auxiliary handle away from the slot of the

cover.

ASSEMBLY

Power head shaft

Handle shaft

Attachment shaft