230V Electric Grass Trimmer Operator’s manual Model:GTE2.5-L-EU For customer service please find all information on www.senixtools.eu. CAUTION:BEFORE USING THIS PRODUCT,READ THIS MANUAL AND FOLLOW ALL ITS SAFETY RULES AND OPERATING NSTRUCTIONS.
SAFETY & INTERNATIONAL SYMBOLS This operator’s manual describes safety and international symbols and pictographs that may appear on this product. Read the operator’s manual for complete safety, assembly, operating and maintenance and repair information. Caution / Warning. Risk of flying objects or debris Be aware of that there is a risk of flying objects and/or debris when using the machine Keep bystanders away Read the instruction manual. Do not use in rain or wet conditions.
TABLE OF CONTENTS SAFETY WARNINGS.........................................................3 KNOW YOUR UNIT........................................................... 8 SPECIFICATIONS*............................................................10 ASSEMBLY........................................................................10 OPERATION.......................................................................12 MAINTENANCE ................................................................
PERSONAL SAFETY 1. Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury. 2. Use personal protective equipment. Always wear eye protection.
power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools. 6. Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control. 7. Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working conditions and the work to be performed.
MAINTENANCE AND STORAGE 1. Disconnect the product from the power supply(i.e. remove the plug from the power supply or the battery pack)and check for damage after use. 2. Disconnect the product from the power supply (i.e. remove the plug from the power supply or the battery pack) before carrying out maintenance or cleaning work. 3. Use only the manufacturer’s recommended replacement parts and accessories. 4. Inspect and maintain the product regularly.
and keep your hands warm. If any of the ‘whitefinger’ symptoms appear, seek medical advice immediately. ‘Whitefinger’ symptoms include: numbness, loss of feeling, tingling, pricking, pain, loss of strength, changes in skin colour or condition. These symptoms normally appear in the fingers, hands or wrists. The risk increases at low temperatures.
KNOW YOUR UNIT Model: GTE2.5-L-EU For cutting grass and light weeds,edging and decorative trimming around trees, fences, etc. in domestic gardens. 1 2 3 9 4 5 6 8 7 8 1 Auxiliary handle 6 Power head 2 Switch trigger 7 String head 3 Handle 8 Grass deflector 4 Attachment shaft 9 Power cord with plug 5 Power head shaft WWW.SENIXTOOLS.
SPECIFICATIONS* Model GTE2.5-L-EU Rated Voltage 230V/50Hz Rated input power 250 W No-Load speed 12500 min-1 Cutting width 250 mm Line diameter 1.2 mm Sound pressure level LPA=83.5 dB(A) KPA=3.0 dB(A) Measured sound power level LwA=93.68 dB(A) KwA=1.96 dB(A) Guarantee sound power level 96 dB(A) Vibration level ah<2.5m/s2 (K=1.5 m/s2) Weight 1.
ASSEMBLY This product requires assembly. Carefully remove the product and any accessories from the box. Make sure that all items listed in the packing list are included. Inspect the product carefully to make sure no breakage or damage occurred during shipping. Do not discard the packing material until you have carefully inspected and satisfactorily operated the product. If any parts are damaged or missing, please call 49 (0)40 854 10 40 - 14 for assistance.
ASSEMBLY REMOVING THE ATTACHMENT FROM THE POWER HEAD AND THE HANDLE WARNING: Never attach or adjust any attachment while power head is running. Failure to stop the unit may cause serious personal injury. For removing or changing the attachment: 1. Stop the unit. 2. Loose four self-tapping screws form attachment shaft. 3. Take the power head shaft and handle shaft away after removing four screws(Fig. 3). Attachment shaft Fig. 4 REMOVING THE AUXILIARY HANDLE 1 2 1.
OPERATION WARNING: HOLDING THE UNIT WARNING: Always wear eye, hearing, hand, foot and body protection to reduce the risk of injury when operating this unit. Keep all parts of your body away from the rotating cutting attachment and hot surfaces. Do not allow familiarity with this product to make you careless. Remember that a careless fraction of a second is sufficient to inflict serious injury. Always wear eye protection along with hearing protection.
OPERATION CUTTING TIPS • Check the area you wish to cut and remove any objects that may be thrown up by the line. • Check the safety equipment on the device before the start of work. • Start the product. • Wear the device as prescribed using the carry strap and hold with your right hand on the operating handle • Gently push down fully on the fuel lever.
MAINTENANCE WARNING: Always switch the product off, and let the product cool down before performing inspection, maintenance and cleaning work! Maintain this product regularly and carefully! If the product is improperly maintained, it may fail at its intended task, which may produce fatal consequences. WARNING: Wear protective clothing and observe all safety instructions to prevent serious personal injury. 1. Keep the product clean. Remove debris from it after each use and before storage. 2.
CLEANING AND STORAGE CLEANING WARNING: Always switch the product off, remove and pull out the battery pack from the product and let the product cool down before performing inspection, maintenance and cleaning work! Use a small brush to clean the outside of the unit. Do not use strong detergents. Household cleaners that contain aromatic oils such as pine and lemon, and solvents such as kerosene, can damage plastic. Wipe off any moisture with a soft cloth.
PARTS GTE2.5-L-EU 16 WWW.SENIXTOOLS.
No. 1 2 3 4 Part # 6 202024002672 202004001067 202016004182 101001000807 8206-5220010000000 201999001390 7 199023000115 7.1 8020-7402050000120 8RE05-05A 8202-5217010000000 8303-7401010000000 8181-7401010000120 8342-7401010000000 8139-7401010000120 202178000009 247-1009 8NA-05D 8020-7402060100120 5 7.2 7.3 7.4 7.5 7.6 7.7 7.8 7.9 7.10 7.11 WWW.SENIXTOOLS.EU Description handle trigger cabinet Motor assembly Qty.
EC DECLARATION OF CONFORMITY We SENIX Europe GmbH, Theodorstraße 42 – 90, Haus 2b 22761 Hamburg Germany Hereby state that electric grass trimmer is only intended to be used for cutting grass and light weeds,edging and decorative trimming around trees, fences, etc. in domestic gardens. Model: GTE2.
