SDS

Page 10 of 11
Issuing date: March 29, 2016
Page 10 of 11
Issuing date: March 29, 2016
Check whether the package is completed or sealed before transporting; make sure no damage of packages and prevent goods
from falling down during transporting; the transport vehicle should be equipped with facilities for fire-fighting and accidental
release handling; do NOT transport this product together with incompatible substances; stay away from fire and areas of high
temperature during stopovers.
15. Regulatory information
.United States:
Section 355 (extremely hazardous substances): Not listed.
SARA 313: Aluminum (CAS: 7429-90-5), Copper (CAS: 7440-50-8) are listed in SARA 313 Toxic Release Chemicals.
Toxic Substances Control Act (TSCA): All ingredients are listed in the U.S. Toxic Substances Control Act Chemical
Substance Inventory List.
Clean Water Act:
Copper (CAS: 7440-50-8) is listed as Hazardous Substances under the CWA.
Copper (CAS: 7440-50-8) is listed as Priority Pollutants under the CWA.
Carcinogenicity categories: Not listed by ACGIH, IARC and NTP.
Other relevant laws and regulations:
Candidate List of Substances of very high concern (SVHC) according to ECHA: Not listed.
REACH Regulation Annex XVII Regulation List: Not listed.
REACH Regulation Annex XIV Authorization List: Not listed.
Germany – WGK: WGK-2.
(EC) 1272/2008 Annex VI Table 3.1:
Ingredient(s) EC No. 1272/2008 Classification
CLASS. CODE HAZARD CODE
Aluminum (CAS: 7429-90-5) Water-react. 2
Flam.Sol. 3
H261
H228
Propylene Carbonate
(CAS: 108-32-7)
Eye Irrit. 2 H319
Chemical Safety Assessment: A Chemical Safety Assessment has not been carried out.
16. Other information
DISCLAIMER: Employers should use this information only as a supplement to other information gathered by them,
and should make independent judgement of suitability of this information to ensure proper use and protect the health
and safety of employees. This information is furnished without warranty, and any use of the product not in conformance
with this Safety Data Sheet, or in combination with any other product or process, is the responsibility of the user.
References:
GHS AnnexⅡ
GHS SDS Instruction
ANSI Z400.1/Z129.1-2010