User Manual


Installation Instructions Using Third-Party Integration:
If you would like to set up your Smart LED bulbs with a third-party
integrator, such as Amazon Alexa or Google Home, please refer to
support.sengled.com or your "Settings" tab in your Sengled Home app.
Reset Instructions:
For the Hub:
Locate the reset button on the side of the hub. Press and hold the button
for 8 seconds, then release. If the reset is successful, the middle LED will
flash 8 times. At this time, please re-attempt adding your hub with the
Sengled Home App.
For the Bulbs:
To reset your Smart LED bulb, ensure that the bulb is on and then quickly
turn the bulb o and on at least 10 times (using a light switch or power bar
works best). If the reset is successful, the bulb will flash five times. If it does
not flash five times, you will have to try again. Once successfully reset,
please try to pair it in your Sengled Home app again.

Reset Button