User's Manual

Features

• COLOR/CCT/ON/OFF via mobile APP.

• 16 million color options available.

• Bulb is also white tunable from 2000K to 6500K.

• Report the bulb’s energy use and power consumption.

• Compatible with most smart home hubs, supporting Zigbee HA 1.2.1

• Control lighting schedules rules, and more via APP

• OpenHome

, Zigbee Alliance certified.

Package Includes

• One E11-N1EA A19 Bulb

• Welcome card containing online user manual

Product Specifications

• Power: 8.6 Watts

• Input: 100-130 V AC, 60 Hz, 100mA

• Color Temperature: 2000K-6500K

• Brightness: 800 lumens@2700K, 570lm@5000K

• Light Socket: E26

• Beam Angle: 200 degrees

• Operating Temperature: -4° F ~ +104° F

• Storage Temperature: -40° F ~ +158° F

• Operating Humidity: 0% RH 95%, non-condensing

Installation Instructions

Adding the bulb to any smart home hub involves the following two steps:

Step 1: Prepare the bulb to enter pairing mode.

• Turn the light switch to OFF position prior to installing the LED bulb, then screw

the bulb into a standard light socket and turn the switch on.

• Brand new bulbs automatically enter pairing mode for three minutes when

switched on. To re-enter pairing mode, switch the bulb off and on to restart the

three-minute cycle.

• If you are unsure whether the bulb is paired, factory reset the bulb. If bulb is

unpaired, the bulb will flash white, blue, green, and red then white after powering

on.

Step 2: Scan and pair the bulb from smart home hub via mobile device App or hub

control panel. Please read the instructions provided by the specific hub system on how

to complete pairing with the bulb.