Datasheet
91
CONVERTERS & INTERFACES >
MULTI-STANDARD SIGNAL CONVERTERS ISOLATORS > Temperature Converters
ACCESSORIES & SOFTWARE
PM001601 EASY SETUP
Programming cable Programming software
pg. 98 pg. 98
Z109PT2 is a converter for Thermoresistance RTD (PT100, PT1000,
PT500, Nì100) with 2,3,4 wires and provides a mA/V standard
output signal. It’s completely configurable through dip switches
and software. A 3-way galvanic isolation among Power supply //
input // output circuits assures the integrity of your datas.
Z109PT2
RTD TO DC CURRENT/VOLTAGE ISOLATOR/CONVERTER
10..40 Vdc
19..28 Vac
Power
Supply
Input
Output
V
TECHNICAL SPECIFICATIONS
General Data
Power supply
10..40 Vdc / 19..28 Vac / 50-60 Hz
Power consumption
2,5 W
Isolation
1.500 Vac (3 way)
Power transducers
Yes
Accuracy
0,1%
Response time
35 ms (11 bit)..140 ms (16 bit)
Status Indicators
Power supply, error, data transmission, data reception, input status
Setting
Dip- switches
EASY_Z109 (PC software)
Mounting
35 mm DIN rail guide
Protection Degree
IP20
Operating
Temperature
-10..+60 °C
Dimension (W x H x D)
17.5 x 100 x 112 mm
Input
Channel Numbers
1
RTD
Pt100, Pt500, Pt1000, Ni100
Measure 2, 3, 4 wires
Range: -200..600 °C
Resolution 0,1°C
Output
Channel Numbers
1
Voltage
4 scales: 0..1, 0..5, 0..10, 2..10 V
Min load resistance: 2.000 Ω
Current
2 scales: 0/4..20 mA (active/passive)
Max load resistance: 600 Ω
Standard
Approval
CE
Norms
EN 50081-2; EN 55011; EN 50082-2; EN 61000-2-2/4; EN
50140/141; EN 61010-1
Code Description
Z109PT2
RTD to DC current/voltage isolator/converter, Power supply 10..40 Vdc /
19..28 Vac
ORDER CODES
APPLICATION NOTE
PT100
V / mA
SIMILAR PRODUCTS
K109PT K121 Z109REG2 T121
Pt100 converter
Loop powered
isolator / universal
converter
High performance
universal converter
Isolated loop
powered temperature
transmitter
pg. 106 pg. 102 pg. 78 pg. 117
AC/DC VOLTAGE TO DC CURRENT/VOLTAGE ISOLATOR/CONVERTER