Datasheet

MyALARM2
GSM/GPRS Device with GPS Position Control
My2G
Via Austria, 26 • 35127 Padova - (I) - Tel. +39 049 87.05.359
Fax +39 049 87.06.287 • www.seneca.it • info@seneca.it
APPLICATION CASES
TRACKER FUNCTION
A function can be set to track the GPS position at settable times
(default: 2 minutes) via SMS or EMAIL. The “tracker” function can
be set to automatically turn on in the event of alarm or on SMS
command.
GPS COORDINATES
GPS coordinates can be logged just like any other variable, such as:
LAT: latitude
LON: longitude
V: speed (in Km/h)
ALT: metres above sea level.
GPS coordinates are provided in WGS84 standard in degrees to be
directly compatible with Google Maps ™
COMMANDS / PROGRAMMING
Configuration via PC software
Remote Commands by phone ring, SMS
SMS / Email / Phone ring Alarm notification
Bi-directional SMS (Alarms & Commands)
Current position on SMS
and direct display on Google
Maps™
MyALARM2 GPS can send the
current GPS position via an SMS
linked to Google maps™.
This operation can be run on either
action or SMS command.
Using a Smartphone with data
connection, tap on the SMS link to
display the current position map.
FLEET MANAGEMENT
SHIP TRACKING
LIGHT SENSITIVE GPS CONTROL
MY2G_1310EN - October 2013
ORDER CODES
Version / Options Codes Description
GPS MY2G
MYALARM2 GPS
SPST relay board
-0 No
-R Yes
Radio module
-0 No
-W Yes
Connection system
-C Terminal Blocks
-M Clamps
Case color
-B Blue
-G Grey
-S Special
IP66 case (option)
-IP66
electrically isolated case, transparent
front door opening
Accessories: (1) A-GSM (GSM dual band external antenna), (2) A-GSM-DIR-5M (GSM/UMTS Directive
Antenna), (3) A-GSM-OMNIDIR (GSM-UMTS WiFi omnidirective antenna), (4) High performance
Quadband GSM antenna, (5) GPS external antenna, (6) FD01 (Pulse counter photodetector), (7) MY2-
KITIP66 (IP66 ABS Kit for field applications), (8) WS-CONTACT (wireless anti-intrusion sensor), (9)
WS-WATER (wireless anti-flood sensor)
MY2G (MyALARM2 GPS) is a GSM/GPRS telecontrol unit with
tracking functions. MY2G allows the setting of virtual fence and
speed alarms, as well as the activation of tracker “function”.
MyALARM2 can transmit your GPS position to identify the
localization of mobile vehicles such as cars and boats. MY2G can
also send GPS coordinates on Google Maps™ mapping system
via SMS or email. For indoor applications, or with low power, you
can connect an external GPS antenna. In case of alarm MY2G can
perform SMS, email, audio sending. The values of the GPS position
can be logged in as the other variables.
The material in this document is for information only and is subject to change without notice. While reasonable efforts have been made in the preparation of
this document to assure its accuracy, SENECA assumes no liability resulting from errors or omissions, or from the use of the information contained herein.