Instruction Manual

4. AIMING & FIRING

SHOOTING

A) AIMING

B) SIGHT ADJUSTMENT

Elevation adjustment: If the point of impact is too high:

turn screw Fig 8 clockwise. If the point of impact is too

low: adjust screw Fig 8 counter-clockwise.

Windage adjustment: Loosen screw Fig 9. If the point

of impact is too far left: adjust rear sight to A. If the point

of impact is too far right: adjust to the B. Tighten screw

Fig 9.

YOU AND OTHERS WITH YOU SHOULD ALWAYS

WEAR SHOOTING GLASSES TO PROTECT YOUR

EYES. READ ALL INSTRUCTIONS BEFORE USING. BUYER AND USER HAVE THE

RESPONSIBILITY TO OBEY ALL LAWS ABOUT THE PURCHASE, USE AND OWNERSHIP

OF THIS AIRGUN.

IMPORTANT

WARNING:

BE SURE THE AIRGUN IS ALWAYS POINTED IN A SAFE

DIRECTION. NEVER POINT THE AIRGUN AT ANYONE

EVEN IF IT IS UNLOADED. ALWAYS ASSUME AND HANDLE THE AIRGUN AS IF IT WERE

LOADED AND READY TO FIRE.

CORRECT INCORRECT

Fig 8

Fig 9

C) FIRING

- Follow the cocking/pumping/loading/aiming procedures on pages 6-8.

- Press the safety into the “OFF“ position (red ring showing).

- Make sure that the target, backstop and surrounding area are safe.

- After completing these operation steps, squeeze the trigger with a rm, consistent pull

Gradually applying more pressure until the shot is red.

- Repeat steps for subsequent shots.